Documents disponibles écrits par cet auteur

A model for lubrication by oil-in-water emulsions / Sy-Wei Lo in Transactions of the ASME . Journal of tribology, Vol. 132 N° 1 (Janvier 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of tribology > Vol. 132 N° 1 (Janvier 2010) . - 09 p. Titre : A model for lubrication by oil-in-water emulsions Type de document : texte imprimé Auteurs : Sy-Wei Lo, Auteur ; Tzu-Chun Yang, Auteur ; Yong-An Cian, Auteur Année de publication : 2010 Article en page(s) : 09 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Computational  fluid  dynamics  Emulsions  Hydrodynamics  Liquid  films  Lubricants  Oils  PH  Rolling  Shear  strength  Viscosity  Water Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : A model for oil-in-water emulsion has been developed in this paper. A group of viscosity coefficients transiting smoothly and incessantly from the thick film region to the thin film region is defined. The contributions from disperse and continuous phases to the total lubricant pressure and pressure gradient are functions of the oil concentration and the film thickness. The parameters used in these functions are determined by a series of computational fluid dynamics simulations. The onset of inversion and the viscosity after inversion are also investigated. It is found that the critical volume fraction of oil in the inception of inversion is dependent on the oil viscosity and a factor regarding the combined effects from the emulsifier, pH value, droplet size, and the shear rate. A series of simulations using the proposed model has been carried out and compared with the experimental results, such as the film thickness and the extension of oil pool for various rolling speeds and supply oil concentrations. The numerical outputs are basically in agreement with the experiments. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] A model for lubrication by oil-in-water emulsions [texte imprimé] / Sy-Wei Lo, Auteur ; Tzu-Chun Yang, Auteur ; Yong-An Cian, Auteur . - 2010 . - 09 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 132 N° 1 (Janvier 2010) . - 09 p. Mots-clés : Computational  fluid  dynamics  Emulsions  Hydrodynamics  Liquid  films  Lubricants  Oils  PH  Rolling  Shear  strength  Viscosity  Water Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : A model for oil-in-water emulsion has been developed in this paper. A group of viscosity coefficients transiting smoothly and incessantly from the thick film region to the thin film region is defined. The contributions from disperse and continuous phases to the total lubricant pressure and pressure gradient are functions of the oil concentration and the film thickness. The parameters used in these functions are determined by a series of computational fluid dynamics simulations. The onset of inversion and the viscosity after inversion are also investigated. It is found that the critical volume fraction of oil in the inception of inversion is dependent on the oil viscosity and a factor regarding the combined effects from the emulsifier, pH value, droplet size, and the shear rate. A series of simulations using the proposed model has been carried out and compared with the experimental results, such as the film thickness and the extension of oil pool for various rolling speeds and supply oil concentrations. The numerical outputs are basically in agreement with the experiments. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...]