Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
| Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Christian U. Grosse
Documents disponibles écrits par cet auteur
Affiner la rechercheMeasuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting / Nicolas Robeyst in Cement and concrete research, Vol. 39 N° 10 (Octobre 2009)
in Cement and concrete research > Vol. 39 N° 10 (Octobre 2009) . - pp. 868–875
Titre : Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting Type de document : texte imprimé Auteurs : Nicolas Robeyst, Auteur ; Christian U. Grosse, Auteur ; Nele de Belie, Auteur Année de publication : 2009 Article en page(s) : pp. 868–875 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Ultrasonic; Fresh concrete (A); Granulated blast-furnace slag (D); Fly ash (D); Admixture (D) Index. décimale : 691 Matériaux de construction. Pièces et parties composantes Résumé : Research on ultrasonic methods to monitor the setting of concrete has mainly focussed on the wave velocity as a useful quantity. To investigate the application of also the wave energy as a parameter, an experimental program was set up to apply the ultrasonic wave transmission technique on several mortar samples containing air entrainer, blast-furnace slag or fly ash causing clearly different setting behaviour.
The increase of the relative energy E/Eref during setting is generally retarded if ordinary Portland cement is replaced by blast-furnace slag or fly ash. The mixtures with cement of a lower strength class or with large air content were difficult to test with the energy measurements since they were more sensitive to poor sensor contact due to shrinkage. For the other samples, the thresholds E/Eref = 0.02 and 0.13 are proposed to easily determine respectively initial and final setting based on the ultrasonic energy measurements.DEWEY : 620.13 ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609001471 [article] Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting [texte imprimé] / Nicolas Robeyst, Auteur ; Christian U. Grosse, Auteur ; Nele de Belie, Auteur . - 2009 . - pp. 868–875.
Génie Civil
Langues : Anglais (eng)
in Cement and concrete research > Vol. 39 N° 10 (Octobre 2009) . - pp. 868–875
Mots-clés : Ultrasonic; Fresh concrete (A); Granulated blast-furnace slag (D); Fly ash (D); Admixture (D) Index. décimale : 691 Matériaux de construction. Pièces et parties composantes Résumé : Research on ultrasonic methods to monitor the setting of concrete has mainly focussed on the wave velocity as a useful quantity. To investigate the application of also the wave energy as a parameter, an experimental program was set up to apply the ultrasonic wave transmission technique on several mortar samples containing air entrainer, blast-furnace slag or fly ash causing clearly different setting behaviour.
The increase of the relative energy E/Eref during setting is generally retarded if ordinary Portland cement is replaced by blast-furnace slag or fly ash. The mixtures with cement of a lower strength class or with large air content were difficult to test with the energy measurements since they were more sensitive to poor sensor contact due to shrinkage. For the other samples, the thresholds E/Eref = 0.02 and 0.13 are proposed to easily determine respectively initial and final setting based on the ultrasonic energy measurements.DEWEY : 620.13 ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609001471
in Cement and concrete research > Vol. 39 N° 10 (Octobre 2009) . - pp. 868–875
Titre : Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting Type de document : texte imprimé Auteurs : Nicolas Robeyst, Auteur ; Christian U. Grosse, Auteur ; Nele de Belie, Auteur Année de publication : 2009 Article en page(s) : pp. 868–875 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Ultrasonic; Fresh concrete (A); Granulated blast-furnace slag (D); Fly ash (D); Admixture (D) Index. décimale : 691 Matériaux de construction. Pièces et parties composantes Résumé : Research on ultrasonic methods to monitor the setting of concrete has mainly focussed on the wave velocity as a useful quantity. To investigate the application of also the wave energy as a parameter, an experimental program was set up to apply the ultrasonic wave transmission technique on several mortar samples containing air entrainer, blast-furnace slag or fly ash causing clearly different setting behaviour.
The increase of the relative energy E/Eref during setting is generally retarded if ordinary Portland cement is replaced by blast-furnace slag or fly ash. The mixtures with cement of a lower strength class or with large air content were difficult to test with the energy measurements since they were more sensitive to poor sensor contact due to shrinkage. For the other samples, the thresholds E/Eref = 0.02 and 0.13 are proposed to easily determine respectively initial and final setting based on the ultrasonic energy measurements.DEWEY : 620.13 ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609001471 [article] Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting [texte imprimé] / Nicolas Robeyst, Auteur ; Christian U. Grosse, Auteur ; Nele de Belie, Auteur . - 2009 . - pp. 868–875.
Génie Civil
Langues : Anglais (eng)
in Cement and concrete research > Vol. 39 N° 10 (Octobre 2009) . - pp. 868–875
Mots-clés : Ultrasonic; Fresh concrete (A); Granulated blast-furnace slag (D); Fly ash (D); Admixture (D) Index. décimale : 691 Matériaux de construction. Pièces et parties composantes Résumé : Research on ultrasonic methods to monitor the setting of concrete has mainly focussed on the wave velocity as a useful quantity. To investigate the application of also the wave energy as a parameter, an experimental program was set up to apply the ultrasonic wave transmission technique on several mortar samples containing air entrainer, blast-furnace slag or fly ash causing clearly different setting behaviour.
The increase of the relative energy E/Eref during setting is generally retarded if ordinary Portland cement is replaced by blast-furnace slag or fly ash. The mixtures with cement of a lower strength class or with large air content were difficult to test with the energy measurements since they were more sensitive to poor sensor contact due to shrinkage. For the other samples, the thresholds E/Eref = 0.02 and 0.13 are proposed to easily determine respectively initial and final setting based on the ultrasonic energy measurements.DEWEY : 620.13 ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609001471
