Design and evaluation of damped air bearings at head-disk interface / Jianhua Li in Transactions of the ASME . Journal of tribology, Vol. 132 N° 3 (Juillet 2010)  

Public ISBD [article]  inTransactions of the ASME . Journal of tribology > Vol. 132 N° 3 (Juillet 2010) . - 13 p. Titre : Design and evaluation of damped air bearings at head-disk interface Type de document : texte imprimé Auteurs : Jianhua Li, Auteur ; Junguo Xu, Auteur ; Yuki Shimizu, Auteur Année de publication : 2011 Article en page(s) : 13 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Damping Elastic constants Frequency response Machine bearings Magnetic heads Modal analysis Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Perturbation and modal-analysis methods were employed to systematically study a damped slider's dynamic characteristics, including an air-bearing slider's stiffness, damping coefficient, frequency response to translation and wavy motion, natural frequencies, damping ratios, and modal shape-node line. We found that a design with grooves distributed on a trailing pad effectively improved the slider's damping ratio in the second pitch mode; however, parametric studies revealed that the damping ratio was dependent on the number of grooves, their depth, location, width, length, distribution, orientation, and types. A higher damping ratio could be obtained by optimizing these parameters. The femto slider we designed with distributed damped grooves on a trailing pad had a higher damping ratio in the second pitch mode, and hence, its responses in the second pitch mode were greatly reduced, which were clarified through simulation and an experiment. Some issues on air-bearing stiffness reduction and negative damping at low frequency and contamination and lube pickup on the damped grooves were also evaluated in the experiment. No degradation could be found in the damped slider. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Design and evaluation of damped air bearings at head-disk interface [texte imprimé] / Jianhua Li, Auteur ; Junguo Xu, Auteur ; Yuki Shimizu, Auteur . - 2011 . - 13 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 132 N° 3 (Juillet 2010) . - 13 p. Mots-clés : Damping Elastic constants Frequency response Machine bearings Magnetic heads Modal analysis Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Perturbation and modal-analysis methods were employed to systematically study a damped slider's dynamic characteristics, including an air-bearing slider's stiffness, damping coefficient, frequency response to translation and wavy motion, natural frequencies, damping ratios, and modal shape-node line. We found that a design with grooves distributed on a trailing pad effectively improved the slider's damping ratio in the second pitch mode; however, parametric studies revealed that the damping ratio was dependent on the number of grooves, their depth, location, width, length, distribution, orientation, and types. A higher damping ratio could be obtained by optimizing these parameters. The femto slider we designed with distributed damped grooves on a trailing pad had a higher damping ratio in the second pitch mode, and hence, its responses in the second pitch mode were greatly reduced, which were clarified through simulation and an experiment. Some issues on air-bearing stiffness reduction and negative damping at low frequency and contamination and lube pickup on the damped grooves were also evaluated in the experiment. No degradation could be found in the damped slider. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire