Oil mist eliminator vessel modifications for GE 7EA gas turbine / Steve Ingistov in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 133 N° 11 (Novembre 2011)  

Public ISBD [article]  inTransactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 11 (Novembre 2011) . - 06 p. Titre : Oil mist eliminator vessel modifications for GE 7EA gas turbine Type de document : texte imprimé Auteurs : Steve Ingistov, Auteur ; Roger Cusack, Auteur ; Rakesh Bhargava, Auteur Année de publication : 2012 Article en page(s) : 06 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Cogeneration Gas turbines Lubricating oils Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : With any rotating machinery as lube oil leaves bearings, a certain amount of lube oil is aerated, resulting in the formation of a mist of very small size (less than 1 µm diameter) particles. If oil mist elimination system is not sized and designed properly, it could cause various issues such as increased operation and maintenance cost, re-entry of oily air into adjacent gas turbine units, fouling of surrounding atmosphere, and creation of oil slick on concrete floors, besides impacting environmental requirements and safety hazards. This paper presents a case study involving GE 7EA gas turbines operating at the Watson Cogeneration Plant and discusses issues with the existing oil mist elimination system and steps taken for a successful replacement of the original equipment manufacturer (OEM) supplied mist elimination system with non-OEM designed and fabricated mist elimination system. The replaced system demonstrated significantly higher life expectancy than it was designed for. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Oil mist eliminator vessel modifications for GE 7EA gas turbine [texte imprimé] / Steve Ingistov, Auteur ; Roger Cusack, Auteur ; Rakesh Bhargava, Auteur . - 2012 . - 06 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 11 (Novembre 2011) . - 06 p. Mots-clés : Cogeneration Gas turbines Lubricating oils Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : With any rotating machinery as lube oil leaves bearings, a certain amount of lube oil is aerated, resulting in the formation of a mist of very small size (less than 1 µm diameter) particles. If oil mist elimination system is not sized and designed properly, it could cause various issues such as increased operation and maintenance cost, re-entry of oily air into adjacent gas turbine units, fouling of surrounding atmosphere, and creation of oil slick on concrete floors, besides impacting environmental requirements and safety hazards. This paper presents a case study involving GE 7EA gas turbines operating at the Watson Cogeneration Plant and discusses issues with the existing oil mist elimination system and steps taken for a successful replacement of the original equipment manufacturer (OEM) supplied mist elimination system with non-OEM designed and fabricated mist elimination system. The replaced system demonstrated significantly higher life expectancy than it was designed for. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire