Documents disponibles écrits par cet auteur

Effects of process variables on the properties of spray - dried mannitol and mannitol / disodium cromoglycate powders suitable for drug delivery by inhalation / Katarzyna Kramek-Romanowska in Industrial & engineering chemistry research, Vol. 50 N° 24 (Décembre 2011) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 50 N° 24 (Décembre 2011) . - pp. 13922–13931 Titre : Effects of process variables on the properties of spray - dried mannitol and mannitol / disodium cromoglycate powders suitable for drug delivery by inhalation Type de document : texte imprimé Auteurs : Katarzyna Kramek-Romanowska, Auteur ; Marcin Odziomek, Auteur ; Tomasz R. Sosnowski, Auteur Année de publication : 2012 Article en page(s) : pp. 13922–13931 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Cromoglycate Résumé : Understanding the influence of process conditions on the properties of pharmaceutical products is critical to their optimal and cost-effective design and manufacture. The aim of this study was to investigate the effect of changing processing variables on the physical properties of spray-dried mannitol and co-spray-dried mannitol/disodium cromoglycate (DSCG) formulations intended for therapeutic inhalation. A 24 full factorial design was performed to assess the consequences of altering the following spray-drying parameters: feed flow rate, nozzle gas flow rate, drying gas inlet temperature, and aspirator capacity (drying gas flow rate). Aqueous solutions of mannitol and mannitol/DSCG were spray-dried using a laboratory-scale spray dryer, and the products were characterized in terms of particle size distribution, powder yield, and particle morphology. These physical properties were found to be affected mainly by two processing variables: nozzle gas flow rate and drying gas inlet temperature. In addition, optimal conditions for the production of inhalable mannitol powders were obtained, generating a yield of 90% by weight of round and smooth particles with a volume median diameter of 4.28 μm. Mannitol/DSCG formulations co-spray-dried in the same conditions had similar characteristics. The results of this study can be applied to controlled formulation of various spray-dried powders for inhalation. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie2006998 [article] Effects of process variables on the properties of spray - dried mannitol and mannitol / disodium cromoglycate powders suitable for drug delivery by inhalation [texte imprimé] / Katarzyna Kramek-Romanowska, Auteur ; Marcin Odziomek, Auteur ; Tomasz R. Sosnowski, Auteur . - 2012 . - pp. 13922–13931. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 24 (Décembre 2011) . - pp. 13922–13931 Mots-clés : Cromoglycate Résumé : Understanding the influence of process conditions on the properties of pharmaceutical products is critical to their optimal and cost-effective design and manufacture. The aim of this study was to investigate the effect of changing processing variables on the physical properties of spray-dried mannitol and co-spray-dried mannitol/disodium cromoglycate (DSCG) formulations intended for therapeutic inhalation. A 24 full factorial design was performed to assess the consequences of altering the following spray-drying parameters: feed flow rate, nozzle gas flow rate, drying gas inlet temperature, and aspirator capacity (drying gas flow rate). Aqueous solutions of mannitol and mannitol/DSCG were spray-dried using a laboratory-scale spray dryer, and the products were characterized in terms of particle size distribution, powder yield, and particle morphology. These physical properties were found to be affected mainly by two processing variables: nozzle gas flow rate and drying gas inlet temperature. In addition, optimal conditions for the production of inhalable mannitol powders were obtained, generating a yield of 90% by weight of round and smooth particles with a volume median diameter of 4.28 μm. Mannitol/DSCG formulations co-spray-dried in the same conditions had similar characteristics. The results of this study can be applied to controlled formulation of various spray-dried powders for inhalation. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie2006998