The effect of hydrodynamic parameters on probability of bubble–particle collision and attachment / B. Shahbazi in Minerals engineering, Vol. 22 N° 1 (Janvier 2009)  

Public ISBD [article]  inMinerals engineering > Vol. 22 N° 1 (Janvier 2009) . - pp. 57–63 Titre : The effect of hydrodynamic parameters on probability of bubble–particle collision and attachment Type de document : texte imprimé Auteurs : B. Shahbazi, Auteur ; B. Rezai, Auteur ; S. M. Javad Koleini, Auteur Année de publication : 2009 Article en page(s) : pp. 57–63 Note générale : Génie Minier Langues : Anglais (eng) Mots-clés : Flotation Coarse particle Dimensionless parameters Collision Attachment Index. décimale : 622 Industrie minière Résumé : In this study the dependence of the impeller speed on the particle size variation was investigated on the quartz particles using laboratory mechanical flotation cell. Maximum recovery was obtained at 1100 rpm. For either more quiescent (impeller speed 1300 rpm) conditions, flotation recovery decreased steadily. Furthermore, amount of collision probabilities is calculated using various equations. According to this study, maximum collision probability was obtained around 48.35% with impeller speed of 1100 rpm, air flow rate of 15 l/h and particle size of 545 μm and minimum collision probability was obtained around 2.43% with impeller speed of 700 rpm, air flow rate of 15 l/h and particle size of 256 μm. Maximum attachment probability was obtained around 44.16% with impeller speed of 1300 rpm, air flow rate of 75 l/h and particle size of 256 μm. With using some frothers such as poly propylene glycol, MIBC and pine oil, probability of collision increased, respectively. Maximum collision probability was obtained around 65.46% with poly propylene glycol dosage of 75 g/t and particle size of 545 μm. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687508000812 [article] The effect of hydrodynamic parameters on probability of bubble–particle collision and attachment [texte imprimé] / B. Shahbazi, Auteur ; B. Rezai, Auteur ; S. M. Javad Koleini, Auteur . - 2009 . - pp. 57–63. Génie Minier Langues : Anglais (eng) in Minerals engineering > Vol. 22 N° 1 (Janvier 2009) . - pp. 57–63 Mots-clés : Flotation Coarse particle Dimensionless parameters Collision Attachment Index. décimale : 622 Industrie minière Résumé : In this study the dependence of the impeller speed on the particle size variation was investigated on the quartz particles using laboratory mechanical flotation cell. Maximum recovery was obtained at 1100 rpm. For either more quiescent (impeller speed 1300 rpm) conditions, flotation recovery decreased steadily. Furthermore, amount of collision probabilities is calculated using various equations. According to this study, maximum collision probability was obtained around 48.35% with impeller speed of 1100 rpm, air flow rate of 15 l/h and particle size of 545 μm and minimum collision probability was obtained around 2.43% with impeller speed of 700 rpm, air flow rate of 15 l/h and particle size of 256 μm. Maximum attachment probability was obtained around 44.16% with impeller speed of 1300 rpm, air flow rate of 75 l/h and particle size of 256 μm. With using some frothers such as poly propylene glycol, MIBC and pine oil, probability of collision increased, respectively. Maximum collision probability was obtained around 65.46% with poly propylene glycol dosage of 75 g/t and particle size of 545 μm. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687508000812

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire