Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Denise Bevilaqua
Documents disponibles écrits par cet auteur
Affiner la rechercheUtilization of electrochemical impedance spectroscopy for monitoring bornite (Cu5FeS4) oxidation by Acidithiobacillus ferrooxidans / Denise Bevilaqua in Minerals engineering, Vol. 22 N° 3 (Fevrier 2009)
[article]
in Minerals engineering > Vol. 22 N° 3 (Fevrier 2009) . - pp. 254–262
Titre : Utilization of electrochemical impedance spectroscopy for monitoring bornite (Cu5FeS4) oxidation by Acidithiobacillus ferrooxidans Type de document : texte imprimé Auteurs : Denise Bevilaqua, Auteur ; Heloisa A. Acciari, Auteur ; Fabiana A. Arena, Auteur Année de publication : 2009 Article en page(s) : pp. 254–262 Note générale : Génie Minier Langues : Anglais (eng) Mots-clés : Bornite (Cu5FeS4) Acidithiobacillus ferrooxidans Electrochemical impedance spectroscopy (EIS) Bioleaching Index. décimale : 622 Industrie minière Résumé : In this work, the monitoring of the bacterial and chemical dissolution of bornite was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS); the mineral surface was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analysis of CV results allowed attributing the different peaks observed in both direct and reverse potential scanning to the oxidation of bornite to a secondary covellite and its reduction via different non stoichiometric copper sulphides intermediaries. EIS data for bornite were obtained in control medium up to 78 h of immersion, when a cellular suspension of A. ferrooxidans was added and the experiments continued up to a 192 h of test. The EIS response was different when bacteria were added in the beginning of the test or after some hours of immersion in acid solution. The experiments were performed in different cell configurations and a model of the electrode/electrolyte interface. The correspondent equivalent electrical circuit was used to fit impedance spectra for all studied conditions. A common equivalent circuit used for corrosion processes where anodic (degradation of the mineral) and cathodic (oxygen reduction) reactions occur in parallel, together film and biofilm formation was proposed. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687508001891 [article] Utilization of electrochemical impedance spectroscopy for monitoring bornite (Cu5FeS4) oxidation by Acidithiobacillus ferrooxidans [texte imprimé] / Denise Bevilaqua, Auteur ; Heloisa A. Acciari, Auteur ; Fabiana A. Arena, Auteur . - 2009 . - pp. 254–262.
Génie Minier
Langues : Anglais (eng)
in Minerals engineering > Vol. 22 N° 3 (Fevrier 2009) . - pp. 254–262
Mots-clés : Bornite (Cu5FeS4) Acidithiobacillus ferrooxidans Electrochemical impedance spectroscopy (EIS) Bioleaching Index. décimale : 622 Industrie minière Résumé : In this work, the monitoring of the bacterial and chemical dissolution of bornite was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS); the mineral surface was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analysis of CV results allowed attributing the different peaks observed in both direct and reverse potential scanning to the oxidation of bornite to a secondary covellite and its reduction via different non stoichiometric copper sulphides intermediaries. EIS data for bornite were obtained in control medium up to 78 h of immersion, when a cellular suspension of A. ferrooxidans was added and the experiments continued up to a 192 h of test. The EIS response was different when bacteria were added in the beginning of the test or after some hours of immersion in acid solution. The experiments were performed in different cell configurations and a model of the electrode/electrolyte interface. The correspondent equivalent electrical circuit was used to fit impedance spectra for all studied conditions. A common equivalent circuit used for corrosion processes where anodic (degradation of the mineral) and cathodic (oxygen reduction) reactions occur in parallel, together film and biofilm formation was proposed. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687508001891