Energy dispersive X-ray diffraction spectroscopy for rapid estimation of calcite in copper ores / P. Escárate in Minerals engineering, Vol. 22 N° 6 (Mai 2009)  

Public ISBD [article]  inMinerals engineering > Vol. 22 N° 6 (Mai 2009) . - pp. 566–571 Titre : Energy dispersive X-ray diffraction spectroscopy for rapid estimation of calcite in copper ores Type de document : texte imprimé Auteurs : P. Escárate, Auteur ; D. Bailo, Auteur ; A. Guesalaga, Auteur Année de publication : 2009 Article en page(s) : pp. 566–571 Note générale : Génie Minier Langues : Anglais (eng) Mots-clés : Calcite Copper Spectroscopy Diffraction Fluorescence Résumé : This article presents a novel technique for measuring the concentration of calcite in copper ore samples using energy dispersive X-ray diffraction (ED-XRD). The results are compared with ultraviolet fluorescence spectroscopy (UVF) for the same group of samples. This approach substantially shortens the measuring time with respect to the current laboratory procedures from 300 min down to 15 min and 9 min for energy dispersive X-ray diffraction and ultraviolet fluorescence spectroscopy, respectively, while preserving a good accuracy level (RMSE The models used for data processing were calibrated and validated for both techniques via the correlation coefficients (View the MathML source and View the MathML source), the error of prediction (RMSEP) and the error of calibration (RMSEC). View the MathML source values between 0.88 and 0.94 were obtained for UVF and ED-XRD data, respectively. The calibration and validation were performed for calcite concentration ranges of 3.4–10.7% in the case of UVF and 2.9–7.6% for ED-XRD. The results reported show the potential of this method for on-line estimation of calcite concentration. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509000247 [article] Energy dispersive X-ray diffraction spectroscopy for rapid estimation of calcite in copper ores [texte imprimé] / P. Escárate, Auteur ; D. Bailo, Auteur ; A. Guesalaga, Auteur . - 2009 . - pp. 566–571. Génie Minier Langues : Anglais (eng) in Minerals engineering > Vol. 22 N° 6 (Mai 2009) . - pp. 566–571 Mots-clés : Calcite Copper Spectroscopy Diffraction Fluorescence Résumé : This article presents a novel technique for measuring the concentration of calcite in copper ore samples using energy dispersive X-ray diffraction (ED-XRD). The results are compared with ultraviolet fluorescence spectroscopy (UVF) for the same group of samples. This approach substantially shortens the measuring time with respect to the current laboratory procedures from 300 min down to 15 min and 9 min for energy dispersive X-ray diffraction and ultraviolet fluorescence spectroscopy, respectively, while preserving a good accuracy level (RMSE The models used for data processing were calibrated and validated for both techniques via the correlation coefficients (View the MathML source and View the MathML source), the error of prediction (RMSEP) and the error of calibration (RMSEC). View the MathML source values between 0.88 and 0.94 were obtained for UVF and ED-XRD data, respectively. The calibration and validation were performed for calcite concentration ranges of 3.4–10.7% in the case of UVF and 2.9–7.6% for ED-XRD. The results reported show the potential of this method for on-line estimation of calcite concentration. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509000247

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire