Value adding limestone to filler grade through an ultra-fine grinding process in jet mill for use in plastic industries / Samayamutthirian Palaniandy in Minerals engineering, Vol. 22 N° 7/8 (Juin/Juillet 2009)  

Public ISBD [article]  inMinerals engineering > Vol. 22 N° 7/8 (Juin/Juillet 2009) . - pp. 695–703 Titre : Value adding limestone to filler grade through an ultra-fine grinding process in jet mill for use in plastic industries Type de document : texte imprimé Auteurs : Samayamutthirian Palaniandy, Auteur ; Nurdina Abd Kadir, Auteur ; Mariatti Jaafar, Auteur Année de publication : 2009 Article en page(s) : pp. 695–703 Note générale : Génie Minier Langues : Anglais (eng) Mots-clés : Fine grinding Jet mill Limestone Mechanochemistry Polypropylene Résumé : In this study, ultra-fine grinding of limestone was carried out in jet mill using four levels of classifier rotational speed and grinding pressure. The holdup amount was determined during the grinding process, while the feed rate was kept constant at 8 kg/h. The ground product was characterized for its particle size and shape. In addition, the mechanochemical effect on the ground product was characterized through XRD. The particles size of the ground product ranged from 2.21 μm to 7.29 μm, demonstrating various particle shapes such as cubical, angular, and elongated. The degree of crystallinity of the ground product ranged from 54.5% to 93.7%. Afterwards, the ground product was incorporated as filler in polypropylene (PP), and its performance was characterized for mechanical properties. After conducting the test work, we find that the PP filled with ground limestone exhibited excellent thermal and mechanical properties. The composite flexural modulus, impact strength, tensile strength, and elongation at break were 2.1 GPa, 42 kJ/m2, 22.75 MPa, and 21%, respectively, when loaded up to 20%. It likewise exhibited CTE value of 57.2 ppm/°C. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509000661 [article] Value adding limestone to filler grade through an ultra-fine grinding process in jet mill for use in plastic industries [texte imprimé] / Samayamutthirian Palaniandy, Auteur ; Nurdina Abd Kadir, Auteur ; Mariatti Jaafar, Auteur . - 2009 . - pp. 695–703. Génie Minier Langues : Anglais (eng) in Minerals engineering > Vol. 22 N° 7/8 (Juin/Juillet 2009) . - pp. 695–703 Mots-clés : Fine grinding Jet mill Limestone Mechanochemistry Polypropylene Résumé : In this study, ultra-fine grinding of limestone was carried out in jet mill using four levels of classifier rotational speed and grinding pressure. The holdup amount was determined during the grinding process, while the feed rate was kept constant at 8 kg/h. The ground product was characterized for its particle size and shape. In addition, the mechanochemical effect on the ground product was characterized through XRD. The particles size of the ground product ranged from 2.21 μm to 7.29 μm, demonstrating various particle shapes such as cubical, angular, and elongated. The degree of crystallinity of the ground product ranged from 54.5% to 93.7%. Afterwards, the ground product was incorporated as filler in polypropylene (PP), and its performance was characterized for mechanical properties. After conducting the test work, we find that the PP filled with ground limestone exhibited excellent thermal and mechanical properties. The composite flexural modulus, impact strength, tensile strength, and elongation at break were 2.1 GPa, 42 kJ/m2, 22.75 MPa, and 21%, respectively, when loaded up to 20%. It likewise exhibited CTE value of 57.2 ppm/°C. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509000661

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire