The measurement of chalcopyrite content in rocks and slurries using magnetic resonance / Daniel Bennett in Minerals engineering, Vol. 22 N° 9/10 (Août/Septembre 2009)  

Public ISBD [article]  inMinerals engineering > Vol. 22 N° 9/10 (Août/Septembre 2009) . - pp. 821–825 Titre : The measurement of chalcopyrite content in rocks and slurries using magnetic resonance Type de document : texte imprimé Auteurs : Daniel Bennett, Auteur ; David Miljak, Auteur ; Joe Khachan, Auteur Année de publication : 2009 Article en page(s) : pp. 821–825 Note générale : Génie Minier Langues : Anglais (eng) Mots-clés : Sulphide ores Ore mineralogy Sorting methods Process optimisation Online analysis Résumé : A prototype mineral analyser using magnetic resonance has been configured with two sensors for measurement of the copper sulphide mineral chalcopyrite (CuFeS2) in ores and slurries. In the first configuration, a sensor was optimised to quantify chalcopyrite content in rock fragments. The detection limit for these measurements was estimated at 15 mg of contained chalcopyrite in rock fragments of mass range of 1.4–3.7 g. The magnetic resonance results correlated with separate quantitative X-ray diffraction measurements of chalcopyrite content. The second configuration was used to quantify chalcopyrite content in mineral slurries. Tests on prepared slurry samples with known chalcopyrite concentration were performed, yielding a standard error of 0.1 wt% across the sample range of 0.5–4.0 wt%. Measurements on a commercial mineral slurry were also performed. The design of an online industrial analyser is discussed with reference to processing slurries with high solid loadings, containing phases such as chalcopyrite and other minerals. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509000521 [article] The measurement of chalcopyrite content in rocks and slurries using magnetic resonance [texte imprimé] / Daniel Bennett, Auteur ; David Miljak, Auteur ; Joe Khachan, Auteur . - 2009 . - pp. 821–825. Génie Minier Langues : Anglais (eng) in Minerals engineering > Vol. 22 N° 9/10 (Août/Septembre 2009) . - pp. 821–825 Mots-clés : Sulphide ores Ore mineralogy Sorting methods Process optimisation Online analysis Résumé : A prototype mineral analyser using magnetic resonance has been configured with two sensors for measurement of the copper sulphide mineral chalcopyrite (CuFeS2) in ores and slurries. In the first configuration, a sensor was optimised to quantify chalcopyrite content in rock fragments. The detection limit for these measurements was estimated at 15 mg of contained chalcopyrite in rock fragments of mass range of 1.4–3.7 g. The magnetic resonance results correlated with separate quantitative X-ray diffraction measurements of chalcopyrite content. The second configuration was used to quantify chalcopyrite content in mineral slurries. Tests on prepared slurry samples with known chalcopyrite concentration were performed, yielding a standard error of 0.1 wt% across the sample range of 0.5–4.0 wt%. Measurements on a commercial mineral slurry were also performed. The design of an online industrial analyser is discussed with reference to processing slurries with high solid loadings, containing phases such as chalcopyrite and other minerals. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509000521

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire