Documents disponibles écrits par cet auteur

Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell / Peng Huang in Minerals engineering, Vol. 22 N° 14 (Novembre 2009) 

Public ISBD [article]  in Minerals engineering > Vol. 22 N° 14 (Novembre 2009) . - pp. 1200–1208 Titre : Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell Type de document : texte imprimé Auteurs : Peng Huang, Auteur ; Min-ping Jia, Auteur ; Bing-lin Zhong, Auteur Année de publication : 2009 Article en page(s) : pp. 1200–1208 Note générale : Génie Minier Langues : Anglais (eng) Mots-clés : Ball  mill  Fill  level  Vibration  signal  Coal Résumé : A novel characteristic variable of fill level has been proposed, in order to reduce the influence of various factors on measuring the fill level and improve the measurement accuracy of the fill level. A relationship was developed between the fill level and the angular position of the maximum vibration point on the mill shell through theoretical calculation and on-site experiments. This relationship was studied theoretically with two assumptions. The vibration signals were then collected by an accelerometer mounted directly on the mill shell, and analyzed on the time domain to obtain the maximum vibration point on the mill shell, in order to study the correlation between the fill level and this angular position. Both the results of theoretical calculations and experiments show that the position of the maximum vibration point on the mill shell moves to a lower angular position as the fill level increases. Comparison of the traditional and the new characteristic variable of the fill level reveals that the characteristic variable proposed in this paper is more superior and stable. It shows potential for measuring the fill level more accurately. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509001538 [article] Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell [texte imprimé] / Peng Huang, Auteur ; Min-ping Jia, Auteur ; Bing-lin Zhong, Auteur . - 2009 . - pp. 1200–1208. Génie Minier Langues : Anglais (eng) in Minerals engineering > Vol. 22 N° 14 (Novembre 2009) . - pp. 1200–1208 Mots-clés : Ball  mill  Fill  level  Vibration  signal  Coal Résumé : A novel characteristic variable of fill level has been proposed, in order to reduce the influence of various factors on measuring the fill level and improve the measurement accuracy of the fill level. A relationship was developed between the fill level and the angular position of the maximum vibration point on the mill shell through theoretical calculation and on-site experiments. This relationship was studied theoretically with two assumptions. The vibration signals were then collected by an accelerometer mounted directly on the mill shell, and analyzed on the time domain to obtain the maximum vibration point on the mill shell, in order to study the correlation between the fill level and this angular position. Both the results of theoretical calculations and experiments show that the position of the maximum vibration point on the mill shell moves to a lower angular position as the fill level increases. Comparison of the traditional and the new characteristic variable of the fill level reveals that the characteristic variable proposed in this paper is more superior and stable. It shows potential for measuring the fill level more accurately. DEWEY : 622 ISSN : 0892-6875 En ligne : http://www.sciencedirect.com/science/article/pii/S0892687509001538