Documents disponibles écrits par cet auteur

Effect of brief heat-curing on microstructure and mechanical properties in fresh cement based mortars / P. Ballester in Cement and concrete research, Vol. 39 N° 7 (Juillet 2009) 

Public ISBD [article]  in Cement and concrete research > Vol. 39 N° 7 (Juillet 2009) . - pp. 573–579 Titre : Effect of brief heat-curing on microstructure and mechanical properties in fresh cement based mortars Type de document : texte imprimé Auteurs : P. Ballester, Auteur ; A. Hidalgo, Auteur ; I. Mármol, Auteur Année de publication : 2009 Article en page(s) : pp. 573–579 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Mortar;  Cement;  Curing;  Temperature Résumé : The effect of temperature on fresh mortar and cement paste was evaluated by simulating the curing conditions of external buildings plastering applied under extremely hot weather. The specimens were heated at controlled temperatures in the 40−80 °C range by exposure to IR radiation over short periods. The effect of soaking for a short time was also examined. The results of compressive strength tests, scanning electron microscopy, infrared spectroscopy and mercury porosimetry helped to characterize the mechanical and physico-chemical properties of the studied sample. Early age behaviour (28 days) in neat cement was barely affected by the temperature. By contrast, exposure to high temperatures caused significant microstructural changes in the mortar. However, successive soaking over short periods was found to reactivate the mechanism of curing and restore the expected mechanical properties. Based on the results, application of cement based mortar at high temperatures is effective when followed by a short, specific soaking process. ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S000888460900088X [article] Effect of brief heat-curing on microstructure and mechanical properties in fresh cement based mortars [texte imprimé] / P. Ballester, Auteur ; A. Hidalgo, Auteur ; I. Mármol, Auteur . - 2009 . - pp. 573–579. Génie Civil Langues : Anglais (eng) in Cement and concrete research > Vol. 39 N° 7 (Juillet 2009) . - pp. 573–579 Mots-clés : Mortar;  Cement;  Curing;  Temperature Résumé : The effect of temperature on fresh mortar and cement paste was evaluated by simulating the curing conditions of external buildings plastering applied under extremely hot weather. The specimens were heated at controlled temperatures in the 40−80 °C range by exposure to IR radiation over short periods. The effect of soaking for a short time was also examined. The results of compressive strength tests, scanning electron microscopy, infrared spectroscopy and mercury porosimetry helped to characterize the mechanical and physico-chemical properties of the studied sample. Early age behaviour (28 days) in neat cement was barely affected by the temperature. By contrast, exposure to high temperatures caused significant microstructural changes in the mortar. However, successive soaking over short periods was found to reactivate the mechanism of curing and restore the expected mechanical properties. Based on the results, application of cement based mortar at high temperatures is effective when followed by a short, specific soaking process. ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S000888460900088X