Synthesis of copolymers of methoxy polyethylene glycol acrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid: Its characterization and application as superplasticizer in concrete / Arzu Büyükyağcı in Cement and concrete research, Vol. 39 N° 7 (Juillet 2009)  

Public ISBD [article]  inCement and concrete research > Vol. 39 N° 7 (Juillet 2009) . - pp. 629–635 Titre : Synthesis of copolymers of methoxy polyethylene glycol acrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid: Its characterization and application as superplasticizer in concrete Type de document : texte imprimé Auteurs : Arzu Büyükyağcı, Auteur ; Gözde Tuzcu, Auteur ; Leyla Aras, Auteur Année de publication : 2009 Article en page(s) : pp. 629–635 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Water-soluble copolymers  Concrete  Superplasticizer  Fluidity  Grafting Résumé : Water-soluble copolymers of methoxy polyethylene glycol acrylate (mPEGA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were synthesized by free radicalic polymerization and evaluated as slump-retaining dispersant for cement particles. The slump-retaining effect of the synthesized copolymers was studied in terms of reaction pH, composition, and molecular weight of mPEG side chains. mPEG grafted copolymers (mPEGA-co-AMPS) were characterized by FTIR, 1H NMR. In this study, dilute solution viscometry measurements were performed to compare the molecular weight effect on fluidity of the copolymers and mechanical properties of the mortar samples prepared by the copolymers were investigated to determine the flexural strength and compressive strengths. It was observed that the reaction pH had a noticeable effect on the molecular weight of the PEG-grafted samples thus causing a significant effect on fluidity. mPEGA-co-AMPS synthesized at a pH of 6 has given the highest fluidity result. Copolymers with mPEG side chains with a molecular weight of 1100 gave higher fluidity and viscosity average molecular weight values than the copolymers with mPEG 2000 side chains. Furthermore, for all the samples tested in this research, increase in molecular weight caused an increase in fluidity, however, a decrease in mechanical properties due to the different air contents of these copolymers. ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609000714 [article] Synthesis of copolymers of methoxy polyethylene glycol acrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid: Its characterization and application as superplasticizer in concrete [texte imprimé] / Arzu Büyükyağcı, Auteur ; Gözde Tuzcu, Auteur ; Leyla Aras, Auteur . - 2009 . - pp. 629–635. Génie Civil Langues : Anglais (eng) in Cement and concrete research > Vol. 39 N° 7 (Juillet 2009) . - pp. 629–635 Mots-clés : Water-soluble copolymers  Concrete  Superplasticizer  Fluidity  Grafting Résumé : Water-soluble copolymers of methoxy polyethylene glycol acrylate (mPEGA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were synthesized by free radicalic polymerization and evaluated as slump-retaining dispersant for cement particles. The slump-retaining effect of the synthesized copolymers was studied in terms of reaction pH, composition, and molecular weight of mPEG side chains. mPEG grafted copolymers (mPEGA-co-AMPS) were characterized by FTIR, 1H NMR. In this study, dilute solution viscometry measurements were performed to compare the molecular weight effect on fluidity of the copolymers and mechanical properties of the mortar samples prepared by the copolymers were investigated to determine the flexural strength and compressive strengths. It was observed that the reaction pH had a noticeable effect on the molecular weight of the PEG-grafted samples thus causing a significant effect on fluidity. mPEGA-co-AMPS synthesized at a pH of 6 has given the highest fluidity result. Copolymers with mPEG side chains with a molecular weight of 1100 gave higher fluidity and viscosity average molecular weight values than the copolymers with mPEG 2000 side chains. Furthermore, for all the samples tested in this research, increase in molecular weight caused an increase in fluidity, however, a decrease in mechanical properties due to the different air contents of these copolymers. ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609000714

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire