Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Antonio E. Abrantes
Documents disponibles écrits par cet auteur
Affiner la rechercheEffect of strain rate on the stress-strain behavior of sand / Jerry A. Yamamuro in Journal of geotechnical and geoenvironmental engineering, Vol. 137 N° 12 (Décembre 2011)
[article]
in Journal of geotechnical and geoenvironmental engineering > Vol. 137 N° 12 (Décembre 2011) . - pp. 1169-1178
Titre : Effect of strain rate on the stress-strain behavior of sand Type de document : texte imprimé Auteurs : Jerry A. Yamamuro, Auteur ; Antonio E. Abrantes, Auteur ; Poul V. Lade, Auteur Année de publication : 2012 Article en page(s) : pp. 1169-1178 Note générale : Géotechnique Langues : Anglais (eng) Mots-clés : Global strain Image analysis Local strain Photography Sand Strain Strain rate Stress strain Transient testing Triaxial tests Résumé : Drained triaxial compression tests on crushed coral sand were performed from near-static strain rates to very high strain rates (up to approximately 1,800%/s). Experiments were performed on dry, vacuum-confined axisymmetric specimens at two different confining pressures (98 and 350 kPa) and two different densities (Dr approximately 36 and 60%). A gravity drop weight loading system was used to generate high strain rates. High-speed film photographs of the specimen were taken through the flat sides of a square triaxial cell. By using digital image analysis techniques, strains were locally measured near the center of the specimen to obtain the most uniform assessment. Stress-strain relationships are presented. The following effects were observed with increasing strain rates: the elastoplastic stiffness increased significantly; the failure shear strength increased moderately; the axial strain at peak stress decreased significantly; and volumetric strains became more dilatant. Unusual behavior was observed at very high strain rates. Examples include the peak stress was not always associated with the maximum dilatancy rate and shear band inclination angle was noticeably reduced. DEWEY : 624.1 ISSN : 1090-0241 En ligne : http://ascelibrary.org/gto/resource/1/jggefk/v137/i12/p1169_s1?isAuthorized=no [article] Effect of strain rate on the stress-strain behavior of sand [texte imprimé] / Jerry A. Yamamuro, Auteur ; Antonio E. Abrantes, Auteur ; Poul V. Lade, Auteur . - 2012 . - pp. 1169-1178.
Géotechnique
Langues : Anglais (eng)
in Journal of geotechnical and geoenvironmental engineering > Vol. 137 N° 12 (Décembre 2011) . - pp. 1169-1178
Mots-clés : Global strain Image analysis Local strain Photography Sand Strain Strain rate Stress strain Transient testing Triaxial tests Résumé : Drained triaxial compression tests on crushed coral sand were performed from near-static strain rates to very high strain rates (up to approximately 1,800%/s). Experiments were performed on dry, vacuum-confined axisymmetric specimens at two different confining pressures (98 and 350 kPa) and two different densities (Dr approximately 36 and 60%). A gravity drop weight loading system was used to generate high strain rates. High-speed film photographs of the specimen were taken through the flat sides of a square triaxial cell. By using digital image analysis techniques, strains were locally measured near the center of the specimen to obtain the most uniform assessment. Stress-strain relationships are presented. The following effects were observed with increasing strain rates: the elastoplastic stiffness increased significantly; the failure shear strength increased moderately; the axial strain at peak stress decreased significantly; and volumetric strains became more dilatant. Unusual behavior was observed at very high strain rates. Examples include the peak stress was not always associated with the maximum dilatancy rate and shear band inclination angle was noticeably reduced. DEWEY : 624.1 ISSN : 1090-0241 En ligne : http://ascelibrary.org/gto/resource/1/jggefk/v137/i12/p1169_s1?isAuthorized=no