Documents disponibles écrits par cet auteur

Rotordynamic force prediction of centrifugal compressor impellers using computational fluid dynamics / J. Jeffrey Moore in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 133 N° 4 (Avril 2011) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 4 (Avril 2011) . - 10 p. Titre : Rotordynamic force prediction of centrifugal compressor impellers using computational fluid dynamics Type de document : texte imprimé Auteurs : J. Jeffrey Moore, Auteur ; David L. Ransom, Auteur ; Flavia Viana, Auteur Année de publication : 2012 Article en page(s) : 10 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Aerodynamics  Compressors  Computational  fluid  dynamics  Impellers  Production  equipment  Rotors Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The energy industry depends on centrifugal compressors to produce, process, reinject, and transport many different gases. Centrifugal compressors use one or more impellers to impart momentum to the flowing gas and, thereby, produce an increase in pressure through diffusion. As the operating pressure in a compressor increases, the fluid-rotor interaction at the seals and impellers become more important. Also, the new generation of megascale liquefied natural gas compressors is dependent on accurate assessment of these forces. The aerodynamic forces and cross-coupled stiffness from the impellers cannot be accurately predicted with traditional methods and must be estimated with semiempirical formulations. The result of these inaccuracies is a potential for compressor designs that can experience unexpected, dangerous, and damaging instabilities and subsynchronous vibrations. The current investigation is intended to advance the state of the art to achieve an improved, physics-based method of predicted aerodynamic destabilizing cross-coupling forces on centrifugal compressor impellers using computational fluid dynamics (CFD). CFD was employed in this study to predict the impeller-fluid interaction forces, which gives rise to the aerodynamic cross coupling. The procedure utilized in this study was developed by Moore and Palazzolo (2002, “Rotordynamic Force Prediction of Centrifugal Impeller Shroud Passages Using Computational Fluid Dynamic Techniques With Combined Primary Secondary Flow Model,” ASME J. Eng. Gas Turbines Power, 123, pp. 910–918), which applied the method to liquid pump impellers. Their results showed good correlation to test data. Unfortunately, no such data exist for centrifugal compressors. Therefore, in order to validate the present model, comparisons will be made to predict the instability of an industrial centrifugal compressor. A parametric CFD study is then presented leading to a new analytical expression for predicting the cross-coupled stiffness for centrifugal impellers. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Rotordynamic force prediction of centrifugal compressor impellers using computational fluid dynamics [texte imprimé] / J. Jeffrey Moore, Auteur ; David L. Ransom, Auteur ; Flavia Viana, Auteur . - 2012 . - 10 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 4 (Avril 2011) . - 10 p. Mots-clés : Aerodynamics  Compressors  Computational  fluid  dynamics  Impellers  Production  equipment  Rotors Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The energy industry depends on centrifugal compressors to produce, process, reinject, and transport many different gases. Centrifugal compressors use one or more impellers to impart momentum to the flowing gas and, thereby, produce an increase in pressure through diffusion. As the operating pressure in a compressor increases, the fluid-rotor interaction at the seals and impellers become more important. Also, the new generation of megascale liquefied natural gas compressors is dependent on accurate assessment of these forces. The aerodynamic forces and cross-coupled stiffness from the impellers cannot be accurately predicted with traditional methods and must be estimated with semiempirical formulations. The result of these inaccuracies is a potential for compressor designs that can experience unexpected, dangerous, and damaging instabilities and subsynchronous vibrations. The current investigation is intended to advance the state of the art to achieve an improved, physics-based method of predicted aerodynamic destabilizing cross-coupling forces on centrifugal compressor impellers using computational fluid dynamics (CFD). CFD was employed in this study to predict the impeller-fluid interaction forces, which gives rise to the aerodynamic cross coupling. The procedure utilized in this study was developed by Moore and Palazzolo (2002, “Rotordynamic Force Prediction of Centrifugal Impeller Shroud Passages Using Computational Fluid Dynamic Techniques With Combined Primary Secondary Flow Model,” ASME J. Eng. Gas Turbines Power, 123, pp. 910–918), which applied the method to liquid pump impellers. Their results showed good correlation to test data. Unfortunately, no such data exist for centrifugal compressors. Therefore, in order to validate the present model, comparisons will be made to predict the instability of an industrial centrifugal compressor. A parametric CFD study is then presented leading to a new analytical expression for predicting the cross-coupled stiffness for centrifugal impellers. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]