Use of porous ceramic waste aggregates for internal curing of high-performance concrete / Masahiro Suzuki in Cement and concrete research, Vol. 39 N° 5 (Mai 2009)  

Public ISBD [article]  inCement and concrete research > Vol. 39 N° 5 (Mai 2009) . - pp. 373–381 Titre : Use of porous ceramic waste aggregates for internal curing of high-performance concrete Type de document : texte imprimé Auteurs : Masahiro Suzuki, Auteur ; Mohammed Seddik Meddah, Auteur ; Ryoichi Sato, Auteur Année de publication : 2009 Article en page(s) : pp. 373–381 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Autogenous strains  Induced stress  Internal curing  Porous ceramic waste aggregates  Silica fume concrete Résumé : Internal curing has become extensively used to reduce autogenous shrinkage and consequently mitigate the high risk of early age cracking of high-performance concrete (HPC). This paper investigates the efficiency of internal wet curing provided by a new type of aggregate, "recycled waste porous ceramic coarse aggregates" (PCCA). Six different silica fume HPCs with and without the PCCA are examined with respect to measured physical and mechanical property development. Four different replacement proportions of normal weight coarse aggregate (NCA) by the PCCA have been evaluated. The results have shown a high effectiveness of the PCCA for internal curing purposes, to drastically reduce and even to completely eliminate autogenous shrinkage of HPC prepared with a very low water/binder ratio (w/b) of 0.15. It has been found that the incorporation of 40% of the PCCA leads to a non-shrinking HPC that results in an insignificant internal stress accompanied by a significant increase of the compressive strength. It should be noted that for the different proportions of the PCCA incorporated no decrease of the compressive strength has been observed at either early or later ages, as is the case with some conventional lightweight aggregates. ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609000209 [article] Use of porous ceramic waste aggregates for internal curing of high-performance concrete [texte imprimé] / Masahiro Suzuki, Auteur ; Mohammed Seddik Meddah, Auteur ; Ryoichi Sato, Auteur . - 2009 . - pp. 373–381. Génie Civil Langues : Anglais (eng) in Cement and concrete research > Vol. 39 N° 5 (Mai 2009) . - pp. 373–381 Mots-clés : Autogenous strains  Induced stress  Internal curing  Porous ceramic waste aggregates  Silica fume concrete Résumé : Internal curing has become extensively used to reduce autogenous shrinkage and consequently mitigate the high risk of early age cracking of high-performance concrete (HPC). This paper investigates the efficiency of internal wet curing provided by a new type of aggregate, "recycled waste porous ceramic coarse aggregates" (PCCA). Six different silica fume HPCs with and without the PCCA are examined with respect to measured physical and mechanical property development. Four different replacement proportions of normal weight coarse aggregate (NCA) by the PCCA have been evaluated. The results have shown a high effectiveness of the PCCA for internal curing purposes, to drastically reduce and even to completely eliminate autogenous shrinkage of HPC prepared with a very low water/binder ratio (w/b) of 0.15. It has been found that the incorporation of 40% of the PCCA leads to a non-shrinking HPC that results in an insignificant internal stress accompanied by a significant increase of the compressive strength. It should be noted that for the different proportions of the PCCA incorporated no decrease of the compressive strength has been observed at either early or later ages, as is the case with some conventional lightweight aggregates. ISSN : 0008-8846 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609000209

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire