Documents disponibles écrits par cet auteur

FLOX® combustion at high power density and high flame temperatures / Oliver Lammel in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 12 (Décembre 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 12 (Décembre 2010) . - 10 p. Titre : FLOX® combustion at high power density and high flame temperatures Type de document : texte imprimé Auteurs : Oliver Lammel, Auteur ; Harald Schütz, Auteur ; Guido Schmitz, Auteur Année de publication : 2011 Article en page(s) : 10 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Combustion  Flames  Gas  turbines  Reaction  kinetics Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : In this contribution, an overview of the progress in the design of an enhanced FLOX® burner is given. A fuel flexible burner concept was developed to fulfill the requirements of modern gas turbines: high specific power density, high turbine inlet temperature, and low NOx emissions. The basis for the research work is numerical simulation. With the focus on pollutant emissions, a detailed chemical kinetic mechanism is used in the calculations. A novel mixing control concept, called HiPerMix®, and its application in the FLOX® burner are presented. In view of the desired operational conditions in a gas turbine combustor, this enhanced FLOX® burner was manufactured and experimentally investigated at the DLR test facility. In the present work, experimental and computational results are presented for natural gas and natural gas+hydrogen combustion at gas turbine relevant conditions and high adiabatic flame temperatures (up to Tad=2000 K). The respective power densities are PA=13.3 MW/m2 bar (natural gas (NG)) and PA=14.8 MW/m2 bar (NG+H2), satisfying the demands of a gas turbine combustor. It is demonstrated that the combustion is complete and stable and that the pollutant emissions are very low. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] FLOX® combustion at high power density and high flame temperatures [texte imprimé] / Oliver Lammel, Auteur ; Harald Schütz, Auteur ; Guido Schmitz, Auteur . - 2011 . - 10 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 12 (Décembre 2010) . - 10 p. Mots-clés : Combustion  Flames  Gas  turbines  Reaction  kinetics Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : In this contribution, an overview of the progress in the design of an enhanced FLOX® burner is given. A fuel flexible burner concept was developed to fulfill the requirements of modern gas turbines: high specific power density, high turbine inlet temperature, and low NOx emissions. The basis for the research work is numerical simulation. With the focus on pollutant emissions, a detailed chemical kinetic mechanism is used in the calculations. A novel mixing control concept, called HiPerMix®, and its application in the FLOX® burner are presented. In view of the desired operational conditions in a gas turbine combustor, this enhanced FLOX® burner was manufactured and experimentally investigated at the DLR test facility. In the present work, experimental and computational results are presented for natural gas and natural gas+hydrogen combustion at gas turbine relevant conditions and high adiabatic flame temperatures (up to Tad=2000 K). The respective power densities are PA=13.3 MW/m2 bar (natural gas (NG)) and PA=14.8 MW/m2 bar (NG+H2), satisfying the demands of a gas turbine combustor. It is demonstrated that the combustion is complete and stable and that the pollutant emissions are very low. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]