Documents disponibles écrits par cet auteur

3D RANS simulation of turbulent flow and combustion in a 5 MW reverse-flow type gas turbine combustor / Daero Joung in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 11 (Novembre 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 11 (Novembre 2010) . - 09 p. Titre : 3D RANS simulation of turbulent flow and combustion in a 5 MW reverse-flow type gas turbine combustor Type de document : texte imprimé Auteurs : Daero Joung, Auteur ; Kang Y. Huh, Auteur Année de publication : 2011 Article en page(s) : 09 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Combustion  Flames  Gas  turbines  Nozzles  Swirling  flow  Turbulence Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : This study is concerned with 3D RANS simulation of turbulent flow and combustion in a 5 MW commercial gas turbine combustor. The combustor under consideration is a reverse flow, dry low NOx type, in which methane and air are partially mixed inside swirl vanes. We evaluated different turbulent combustion models to provide insights into mixing, temperature distribution, and emission in the combustor. Validation is performed for the models in STAR-CCM+ against the measurement data for a simple swirl flame (http://public.ca.sandia.gov/TNF/swirlflames.html). The standard k-epsilon model with enhanced wall treatment is employed to model turbulent swirl flow, whereas eddy break-up (EBU), presumed probability density function laminar flamelet model, and partially premixed coherent flame model (PCFM) are tried for reacting flow in the combustor. Independent simulations are carried out for the main and pilot nozzles to avoid flashback and to provide realistic inflow boundary conditions for the combustor. Geometrical details such as air swirlers, vane passages, and liner holes are all taken into account. Tested combustion models show similar downstream distributions of the mean flow and temperature, while EBU and PCFM show a lifted flame with stronger effects of swirl due to limited increase in axial momentum by expansion. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] 3D RANS simulation of turbulent flow and combustion in a 5 MW reverse-flow type gas turbine combustor [texte imprimé] / Daero Joung, Auteur ; Kang Y. Huh, Auteur . - 2011 . - 09 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 11 (Novembre 2010) . - 09 p. Mots-clés : Combustion  Flames  Gas  turbines  Nozzles  Swirling  flow  Turbulence Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : This study is concerned with 3D RANS simulation of turbulent flow and combustion in a 5 MW commercial gas turbine combustor. The combustor under consideration is a reverse flow, dry low NOx type, in which methane and air are partially mixed inside swirl vanes. We evaluated different turbulent combustion models to provide insights into mixing, temperature distribution, and emission in the combustor. Validation is performed for the models in STAR-CCM+ against the measurement data for a simple swirl flame (http://public.ca.sandia.gov/TNF/swirlflames.html). The standard k-epsilon model with enhanced wall treatment is employed to model turbulent swirl flow, whereas eddy break-up (EBU), presumed probability density function laminar flamelet model, and partially premixed coherent flame model (PCFM) are tried for reacting flow in the combustor. Independent simulations are carried out for the main and pilot nozzles to avoid flashback and to provide realistic inflow boundary conditions for the combustor. Geometrical details such as air swirlers, vane passages, and liner holes are all taken into account. Tested combustion models show similar downstream distributions of the mean flow and temperature, while EBU and PCFM show a lifted flame with stronger effects of swirl due to limited increase in axial momentum by expansion. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]

Parametric simulation of turbulent reacting flow and emissions in a lean premixed reverse flow type gas turbine combustor / Daero Joung in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 134 N° 2 (Février 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 2 (Février 2012) . - 09 p. Titre : Parametric simulation of turbulent reacting flow and emissions in a lean premixed reverse flow type gas turbine combustor Type de document : texte imprimé Auteurs : Daero Joung, Auteur ; Kang Y. Huh, Auteur ; Yunho An, Auteur Année de publication : 2012 Article en page(s) : 09 p. Note générale : Génie mécanique Langues : Anglais (eng) Mots-clés : Aerospace  engines  Air  pollution  Chemically  reactive  flow  Combustion  equipment  Flames  Gas  turbines  Nozzles  Temperature  distribution  Turbulence Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : This paper describes simulation of a small stationary gas turbine combustor of a reverse flow, semi-silo type for power generation. The premixed coherent flame model (PCFM) is applied for partially premixed methane/air with an imposed downstream flame area density (FAD) to avoid flashback and incomplete combustion. Physical models are validated against the measurements of outlet temperature, product gas composition, and NO emission at the low operating pressure. Parametric study is performed to investigate the effect of load and pilot/total (P/T) fuel ratio on mixing characteristics and the resulting temperature distribution and pollutant emissions. As the P/T fuel ratio increases, the high temperature region over 1900 K enhances reaction of the mixture from the main nozzle in the primary mixing zone. For low P/T ratios, the pilot stream dilutes the mixture, on the contrary, to suppress reaction with an increasing height of the lifted flame. The NO is associated with the unmixedness as well as the mean temperature level and tends to increase with increasing load and P/T ratio. The high operating pressure does not affect overall velocity and temperature distribution, while it tends to increase NO and liner temperature under the given boundary conditions. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000002 [...] [article] Parametric simulation of turbulent reacting flow and emissions in a lean premixed reverse flow type gas turbine combustor [texte imprimé] / Daero Joung, Auteur ; Kang Y. Huh, Auteur ; Yunho An, Auteur . - 2012 . - 09 p. Génie mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 2 (Février 2012) . - 09 p. Mots-clés : Aerospace  engines  Air  pollution  Chemically  reactive  flow  Combustion  equipment  Flames  Gas  turbines  Nozzles  Temperature  distribution  Turbulence Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : This paper describes simulation of a small stationary gas turbine combustor of a reverse flow, semi-silo type for power generation. The premixed coherent flame model (PCFM) is applied for partially premixed methane/air with an imposed downstream flame area density (FAD) to avoid flashback and incomplete combustion. Physical models are validated against the measurements of outlet temperature, product gas composition, and NO emission at the low operating pressure. Parametric study is performed to investigate the effect of load and pilot/total (P/T) fuel ratio on mixing characteristics and the resulting temperature distribution and pollutant emissions. As the P/T fuel ratio increases, the high temperature region over 1900 K enhances reaction of the mixture from the main nozzle in the primary mixing zone. For low P/T ratios, the pilot stream dilutes the mixture, on the contrary, to suppress reaction with an increasing height of the lifted flame. The NO is associated with the unmixedness as well as the mean temperature level and tends to increase with increasing load and P/T ratio. The high operating pressure does not affect overall velocity and temperature distribution, while it tends to increase NO and liner temperature under the given boundary conditions. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000002 [...]