Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Takahiro Harada
Documents disponibles écrits par cet auteur
Affiner la recherchePhotographic study on bubble motion in subcooled pool boiling / Tomio Okawa in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 10 (Octobre 2010)
[article]
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 10 (Octobre 2010) . - 06 p.
Titre : Photographic study on bubble motion in subcooled pool boiling Type de document : texte imprimé Auteurs : Tomio Okawa, Auteur ; Takahiro Harada, Auteur ; Yuta Kotsusa, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Boiling Bubbles Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Using a static contact angle of a vertical heated wall as a main experimental parameter, a photographic study was carried out to elucidate the mechanisms to determine the vapor bubble dynamics during subcooled pool boiling. The test fluid was distilled water and the experiments were performed under the atmospheric pressure; liquid subcooling was set to around 5 K. To enable clear observation of bubble behavior with a high speed camera, the experiments were conducted in an isolated bubble regime near the onset of nucleate boiling. Distinctly different bubble behaviors were observed on hydrophobic and hydrophilic surfaces: the bubbles were adhered to the surface for a long period of time when the contact angle was large while lifted-off the surface within a short period of time after the nucleation when the contact angle was small. Since buoyancy does not remove the bubble from the vertical surface, the mechanisms of bubble lift-off were investigated. It was indicated that the change in bubble shape induced by the surface tension force, unsteady growth force, and local liquid flow induced by heterogeneous condensation around the bubble are considered to promote the bubble lift-off while the surface tension force acting on the three-phase common line prevented the lift-off. Effects of the surface wettability on the lift-off bubble diameter, the elapsed time from the nucleation at the lift-off, and the condensation rate after the lift-off were also investigated. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Photographic study on bubble motion in subcooled pool boiling [texte imprimé] / Tomio Okawa, Auteur ; Takahiro Harada, Auteur ; Yuta Kotsusa, Auteur . - 2011 . - 06 p.
Génie Mécanique
Langues : Anglais (eng)
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 10 (Octobre 2010) . - 06 p.
Mots-clés : Boiling Bubbles Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Using a static contact angle of a vertical heated wall as a main experimental parameter, a photographic study was carried out to elucidate the mechanisms to determine the vapor bubble dynamics during subcooled pool boiling. The test fluid was distilled water and the experiments were performed under the atmospheric pressure; liquid subcooling was set to around 5 K. To enable clear observation of bubble behavior with a high speed camera, the experiments were conducted in an isolated bubble regime near the onset of nucleate boiling. Distinctly different bubble behaviors were observed on hydrophobic and hydrophilic surfaces: the bubbles were adhered to the surface for a long period of time when the contact angle was large while lifted-off the surface within a short period of time after the nucleation when the contact angle was small. Since buoyancy does not remove the bubble from the vertical surface, the mechanisms of bubble lift-off were investigated. It was indicated that the change in bubble shape induced by the surface tension force, unsteady growth force, and local liquid flow induced by heterogeneous condensation around the bubble are considered to promote the bubble lift-off while the surface tension force acting on the three-phase common line prevented the lift-off. Effects of the surface wettability on the lift-off bubble diameter, the elapsed time from the nucleation at the lift-off, and the condensation rate after the lift-off were also investigated. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]