Documents disponibles écrits par cet auteur

Core melt solidification characteristics in PRV lower head-experimental results from LIVE tests / Xiaoyang Gaus-Liu in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 10 (Octobre 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 10 (Octobre 2010) . - 06 p. Titre : Core melt solidification characteristics in PRV lower head-experimental results from LIVE tests Type de document : texte imprimé Auteurs : Xiaoyang Gaus-Liu, Auteur ; Alexei Miassoedov, Auteur ; Thomas Cron, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Fission  reactor  cooling  Light  water  reactors  Solidification Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Core melt solidification phenomena in the lower plenum of pressurized reactor vessel during external reactor vessel cooling is investigated in late in-vessel phase experiment tests under different external cooling conditions and melt pouring positions. The melt solidification behavior, which has not yet been given sufficient attention, is an important issue since it influences not only the transient but also the steady state of melt pool thermal hydraulics. A noneutectic melt (80 mol % KNO3–20 mol % NaNO3) was used to simulate the core melt. It has been found out that when the vessel is cooled with water during the whole test period (water cooling), the cooling is more effective than the case that the vessel lower head is first cooled with air and flooded by water (air/water cooling). Water cooling at the beginning leads to faster buildup of crust layer on the vessel inner wall and lower crust thermal conductivity compared with air/water cooling. In comparison with the air/water cooling, the water cooling also achieves shorter time period of crust growth. During the solidification period in all tests, the constitutional supercooling condition is fulfilled. Pouring position near the vessel wall results in considerable asymmetry in the heat flux distribution through the vessel wall. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Core melt solidification characteristics in PRV lower head-experimental results from LIVE tests [texte imprimé] / Xiaoyang Gaus-Liu, Auteur ; Alexei Miassoedov, Auteur ; Thomas Cron, Auteur . - 2011 . - 06 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 10 (Octobre 2010) . - 06 p. Mots-clés : Fission  reactor  cooling  Light  water  reactors  Solidification Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Core melt solidification phenomena in the lower plenum of pressurized reactor vessel during external reactor vessel cooling is investigated in late in-vessel phase experiment tests under different external cooling conditions and melt pouring positions. The melt solidification behavior, which has not yet been given sufficient attention, is an important issue since it influences not only the transient but also the steady state of melt pool thermal hydraulics. A noneutectic melt (80 mol % KNO3–20 mol % NaNO3) was used to simulate the core melt. It has been found out that when the vessel is cooled with water during the whole test period (water cooling), the cooling is more effective than the case that the vessel lower head is first cooled with air and flooded by water (air/water cooling). Water cooling at the beginning leads to faster buildup of crust layer on the vessel inner wall and lower crust thermal conductivity compared with air/water cooling. In comparison with the air/water cooling, the water cooling also achieves shorter time period of crust growth. During the solidification period in all tests, the constitutional supercooling condition is fulfilled. Pouring position near the vessel wall results in considerable asymmetry in the heat flux distribution through the vessel wall. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]