Documents disponibles écrits par cet auteur

Performance and combustion characteristics of OM314 diesel engine fueled with DME / L. Savadkouhi in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 9 (Septembre 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 9 (Septembre 2010) . - 06 p. Titre : Performance and combustion characteristics of OM314 diesel engine fueled with DME : a theoretical and experimental analysis Type de document : texte imprimé Auteurs : L. Savadkouhi, Auteur ; S. A. Jazayeri, Auteur ; N. Shahangian, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Combustion  Diesel  engines Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Use of dimethyl ether (DME) as a diesel fuel alternative has been increased due to the unique combustion characteristics of this oxygenated fuel. We have investigated performance and combustion characteristics of a naturally aspirated diesel engine using DME as the main fuel. In the experimental part of this work, OM314 direct-injection diesel engine was used as a base engine. A comprehensive full cycle was coupled with a multizone combustion model to simulate performance characteristics of the engine. Results of the volumetric efficiency showed that the highest brake torque was achievable in midspeed range. The power speed diagram showed that the brake torque tended to be much higher for diesel fuel than for DME when the engine speed was less than 1900 rpm. However, in engine speeds higher than 1900 rpm, brake torque in DME mode of operation was larger. Calculated emission results also suggested that negligible soot is produced in DME mode operation. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Performance and combustion characteristics of OM314 diesel engine fueled with DME : a theoretical and experimental analysis [texte imprimé] / L. Savadkouhi, Auteur ; S. A. Jazayeri, Auteur ; N. Shahangian, Auteur . - 2011 . - 06 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 9 (Septembre 2010) . - 06 p. Mots-clés : Combustion  Diesel  engines Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Use of dimethyl ether (DME) as a diesel fuel alternative has been increased due to the unique combustion characteristics of this oxygenated fuel. We have investigated performance and combustion characteristics of a naturally aspirated diesel engine using DME as the main fuel. In the experimental part of this work, OM314 direct-injection diesel engine was used as a base engine. A comprehensive full cycle was coupled with a multizone combustion model to simulate performance characteristics of the engine. Results of the volumetric efficiency showed that the highest brake torque was achievable in midspeed range. The power speed diagram showed that the brake torque tended to be much higher for diesel fuel than for DME when the engine speed was less than 1900 rpm. However, in engine speeds higher than 1900 rpm, brake torque in DME mode of operation was larger. Calculated emission results also suggested that negligible soot is produced in DME mode operation. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]