Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Patrick Borgqvist
Documents disponibles écrits par cet auteur
Affiner la rechercheTransient control of combustion phasing and lambda in a six-cylinder port-injected natural-gas engine / Mehrzad Kaiadi in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 9 (Septembre 2010)
[article]
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 9 (Septembre 2010) . - 06 p.
Titre : Transient control of combustion phasing and lambda in a six-cylinder port-injected natural-gas engine Type de document : texte imprimé Auteurs : Mehrzad Kaiadi, Auteur ; Magnus Lewander, Auteur ; Patrick Borgqvist, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Air pollution Catalysts Combustion Diesel engines Feedforward PI control Predictive control Transients Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Fuel economy and emissions are the two central parameters in heavy duty engines. High exhaust gas recirculation rates combined with turbocharging has been identified as a promising way to increase the maximum load and efficiency of heavy duty spark ignition engines. With stoichiometric conditions, a three way catalyst can be used, which keeps the regulated emissions at very low levels. The Lambda window, which results in very low emissions, is very narrow. This issue is more complex with transient operation, resulting in losing brake efficiency and also catalyst converting efficiency. This paper presents different control strategies to maximize the reliability for maintaining efficiency and emissions levels under transient conditions. Different controllers are developed and tested successfully on a heavy duty six-cylinder port injected natural gas engine. Model predictive control was used to control lambda, which was modeled using system identification. Furthermore, a proportional integral regulator combined with a feedforward map for obtaining maximum brake torque timing was applied. The results show that excellent steady-state and transient performance can be achieved. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Transient control of combustion phasing and lambda in a six-cylinder port-injected natural-gas engine [texte imprimé] / Mehrzad Kaiadi, Auteur ; Magnus Lewander, Auteur ; Patrick Borgqvist, Auteur . - 2011 . - 06 p.
Génie Mécanique
Langues : Anglais (eng)
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 9 (Septembre 2010) . - 06 p.
Mots-clés : Air pollution Catalysts Combustion Diesel engines Feedforward PI control Predictive control Transients Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Fuel economy and emissions are the two central parameters in heavy duty engines. High exhaust gas recirculation rates combined with turbocharging has been identified as a promising way to increase the maximum load and efficiency of heavy duty spark ignition engines. With stoichiometric conditions, a three way catalyst can be used, which keeps the regulated emissions at very low levels. The Lambda window, which results in very low emissions, is very narrow. This issue is more complex with transient operation, resulting in losing brake efficiency and also catalyst converting efficiency. This paper presents different control strategies to maximize the reliability for maintaining efficiency and emissions levels under transient conditions. Different controllers are developed and tested successfully on a heavy duty six-cylinder port injected natural gas engine. Model predictive control was used to control lambda, which was modeled using system identification. Furthermore, a proportional integral regulator combined with a feedforward map for obtaining maximum brake torque timing was applied. The results show that excellent steady-state and transient performance can be achieved. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]