Documents disponibles écrits par cet auteur

Rotordynamic analysis of a large industrial turbocompressor including finite element substructure modeling / J. Jeffrey Moore in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 8 (Août 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 8 (Août 2010) . - 09 p. Titre : Rotordynamic analysis of a large industrial turbocompressor including finite element substructure modeling Type de document : texte imprimé Auteurs : J. Jeffrey Moore, Auteur ; Giuseppe Vannini, Auteur ; Massimo Camatti, Auteur Année de publication : 2011 Article en page(s) : 09 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Compressors  Curve  fitting  Finite  element  analysis  Frequency  response  Machine  bearings  Rotors  Supports  Transfer  functions  Turbomachinery Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : A rotordynamic analysis of a large turbocompressor that models both the casing and supports along with the rotor-bearing system was performed. A 3D finite element model of the casing captures the intricate details of the casing and support structure. Two approaches are presented, including development of transfer functions of the casing and foundation, as well as a fully coupled rotor-casing-foundation model. The effect of bearing support compliance is captured, as well as the influence of casing modes on the rotor response. The first approach generates frequency response functions (FRFs) from the finite element case model at the bearing support locations. A high-order polynomial in numerator-denominator transfer function format is generated from a curve fit of the FRF. These transfer functions are then incorporated into the rotordynamics model. The second approach is a fully coupled rotor and casing model that is solved together. An unbalance response calculation is performed in both cases to predict the resulting rotor critical speeds and response of the casing modes. The effect of the compressor case and supports caused the second critical speed to drop to a value close to the operating speed and not compliant with the requirements of the American Petroleum Institute (API) specification 617 7th edition. A combination of rotor, journal bearing, casing, and support modifications resulted in a satisfactory and API compliant solution. The results of the fully coupled model validated the transfer function approach. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Rotordynamic analysis of a large industrial turbocompressor including finite element substructure modeling [texte imprimé] / J. Jeffrey Moore, Auteur ; Giuseppe Vannini, Auteur ; Massimo Camatti, Auteur . - 2011 . - 09 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 8 (Août 2010) . - 09 p. Mots-clés : Compressors  Curve  fitting  Finite  element  analysis  Frequency  response  Machine  bearings  Rotors  Supports  Transfer  functions  Turbomachinery Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : A rotordynamic analysis of a large turbocompressor that models both the casing and supports along with the rotor-bearing system was performed. A 3D finite element model of the casing captures the intricate details of the casing and support structure. Two approaches are presented, including development of transfer functions of the casing and foundation, as well as a fully coupled rotor-casing-foundation model. The effect of bearing support compliance is captured, as well as the influence of casing modes on the rotor response. The first approach generates frequency response functions (FRFs) from the finite element case model at the bearing support locations. A high-order polynomial in numerator-denominator transfer function format is generated from a curve fit of the FRF. These transfer functions are then incorporated into the rotordynamics model. The second approach is a fully coupled rotor and casing model that is solved together. An unbalance response calculation is performed in both cases to predict the resulting rotor critical speeds and response of the casing modes. The effect of the compressor case and supports caused the second critical speed to drop to a value close to the operating speed and not compliant with the requirements of the American Petroleum Institute (API) specification 617 7th edition. A combination of rotor, journal bearing, casing, and support modifications resulted in a satisfactory and API compliant solution. The results of the fully coupled model validated the transfer function approach. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]

Synchronous response to rotor imbalance using a damped gas bearing / Bugra H. Ertas in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 3 (Mars 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 3 (Mars 2010) . - 09 p. Titre : Synchronous response to rotor imbalance using a damped gas bearing Type de document : texte imprimé Auteurs : Bugra H. Ertas, Auteur ; Massimo Camatti, Auteur ; Gabriele Mariotti, Auteur Année de publication : 2010 Article en page(s) : 09 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Aerospace  engines  Ball  bearings  Damping  Gas  turbines  Rotors  Vibrations Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : One type of test performed for evaluating bearings for application into turbomachinery is the synchronous bearing response to rotor imbalance. This paper presents rotordynamic tests on a rotor system using a 70 mm diameter damped gas bearing reaching ultra-high speeds of 50,000 rpm. The main objective of the study was to experimentally evaluate the ability of the damped gas bearing to withstand large rotor excursions and provide adequate damping through critical speed transitions. Two critical speeds were excited through varying amounts and configurations of rotor imbalance while measuring the synchronous rotordynamic response at two different axial locations. The results indicated a well-damped rotor system and demonstrated the ability of the gas bearing to safely withstand rotor vibration levels while subjected to severe imbalance loading. Also, a waterfall plot was used to verify ultra-high-speed stability of the rotor system throughout the speed range of the test vehicle. In addition to the experimental tests, a rotordynamic computer model was developed for the rotor-bearing system. Using the amplitude/frequency dependent stiffness and damping coefficients for the ball bearing support and the damped gas-bearing support, a pseudononlinear rotordynamic response to imbalance was performed and compared with the experiments. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000132000003 [...] [article] Synchronous response to rotor imbalance using a damped gas bearing [texte imprimé] / Bugra H. Ertas, Auteur ; Massimo Camatti, Auteur ; Gabriele Mariotti, Auteur . - 2010 . - 09 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 3 (Mars 2010) . - 09 p. Mots-clés : Aerospace  engines  Ball  bearings  Damping  Gas  turbines  Rotors  Vibrations Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : One type of test performed for evaluating bearings for application into turbomachinery is the synchronous bearing response to rotor imbalance. This paper presents rotordynamic tests on a rotor system using a 70 mm diameter damped gas bearing reaching ultra-high speeds of 50,000 rpm. The main objective of the study was to experimentally evaluate the ability of the damped gas bearing to withstand large rotor excursions and provide adequate damping through critical speed transitions. Two critical speeds were excited through varying amounts and configurations of rotor imbalance while measuring the synchronous rotordynamic response at two different axial locations. The results indicated a well-damped rotor system and demonstrated the ability of the gas bearing to safely withstand rotor vibration levels while subjected to severe imbalance loading. Also, a waterfall plot was used to verify ultra-high-speed stability of the rotor system throughout the speed range of the test vehicle. In addition to the experimental tests, a rotordynamic computer model was developed for the rotor-bearing system. Using the amplitude/frequency dependent stiffness and damping coefficients for the ball bearing support and the damped gas-bearing support, a pseudononlinear rotordynamic response to imbalance was performed and compared with the experiments. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000132000003 [...]