Implementation of a pressure drop model for the CFD simulation of clogged containment sump strainers / Alexander Grahn in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 8 (Août 2010)  

Public ISBD [article]  inTransactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 8 (Août 2010) . - 09 p. Titre : Implementation of a pressure drop model for the CFD simulation of clogged containment sump strainers Type de document : texte imprimé Auteurs : Alexander Grahn, Auteur ; Eckhard Krepper, Auteur ; Frank-Peter Weiß, Auteur Année de publication : 2011 Article en page(s) : 09 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Computational fluid dynamics Differential equations Fission reactor cooling safety Multiphase flow Pressure Pumps Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The present study aims at modeling the pressure drop of flows through growing cakes of compressible fibrous materials, which may form on the upstream side of containment sump strainers after a loss-of-coolant accident. The model developed is based on the coupled solution of a differential equation for the change of the pressure drop in terms of superficial liquid velocity and local porosity of the fiber cake and a material equation that accounts for the compaction pressure dependent cake porosity. Details of its implementation into a general-purpose three-dimensional computational fluid dynamics code are given. An extension to this basic model is presented, which simulates the time dependent clogging of the fiber cake due to capturing of suspended particles as they pass trough the cake. The extended model relies on empirical relations, which model the change of pressure drop and removal efficiency in terms of particle deposit in the fiber cake. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...] [article] Implementation of a pressure drop model for the CFD simulation of clogged containment sump strainers [texte imprimé] / Alexander Grahn, Auteur ; Eckhard Krepper, Auteur ; Frank-Peter Weiß, Auteur . - 2011 . - 09 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 8 (Août 2010) . - 09 p. Mots-clés : Computational fluid dynamics Differential equations Fission reactor cooling safety Multiphase flow Pressure Pumps Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The present study aims at modeling the pressure drop of flows through growing cakes of compressible fibrous materials, which may form on the upstream side of containment sump strainers after a loss-of-coolant accident. The model developed is based on the coupled solution of a differential equation for the change of the pressure drop in terms of superficial liquid velocity and local porosity of the fiber cake and a material equation that accounts for the compaction pressure dependent cake porosity. Details of its implementation into a general-purpose three-dimensional computational fluid dynamics code are given. An extension to this basic model is presented, which simulates the time dependent clogging of the fiber cake due to capturing of suspended particles as they pass trough the cake. The extended model relies on empirical relations, which model the change of pressure drop and removal efficiency in terms of particle deposit in the fiber cake. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire