Documents disponibles écrits par cet auteur

The structure and mechanical and tribological properties of TiBCN nanocomposite coatings / Jianliang Lin in Acta materialia, Vol. 58 N° 5 (Mars 2010) 

Public ISBD [article]  in Acta materialia > Vol. 58 N° 5 (Mars 2010) . - pp. 1554–1564 Titre : The structure and mechanical and tribological properties of TiBCN nanocomposite coatings Type de document : texte imprimé Auteurs : Jianliang Lin, Auteur ; John J. Moore, Auteur ; Brajendra Mishra, Auteur Année de publication : 2011 Article en page(s) : pp. 1554–1564 Note générale : Métallurgie Langues : Anglais (eng) Mots-clés : TiBCN  coating  Nanocomposite  coating  Nanocrystalline  coating  Pulsed  magnetron  sputtering  Wear Résumé : TiBCN nanocomposite coatings were deposited in a closed field unbalanced magnetron sputtering system using pulsed magnetron sputtering of a TiBC compound target with various Ar/N2 mixtures. TiBCN coatings were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, nanoindentation, Rockwell C indentation and ball-on-disk wear tests. The coatings with a nitrogen content of less than 8 at.% exhibited superhardness values in the range of 44–49 GPa, but also showed poor adhesion and low wear resistance. Improvements in the coating adhesion, H/E ratio and wear resistance were achieved together with a decrease in the coating hardness to 35–45 GPa as the N content in the coatings was increased from 8 to 15 at.%. The microstructure of the coatings changed from a nano-columnar to a nanocomposite structure in which 5–8 nm nanocrystalline Ti(B,C) and Ti(N,C) compounds were embedded in an amorphous matrix consisting of BN, free carbon and CN phases. With a further increase in the N content in the coatings to levels greater than 20 at.%, the inter-particle spacing of the nanocrystalline compounds increased significantly due to the formation of a large amount of the amorphous BN phase, which also led to low hardness and poor wear resistance of the TiBCN coatings. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S1359645409007666 [article] The structure and mechanical and tribological properties of TiBCN nanocomposite coatings [texte imprimé] / Jianliang Lin, Auteur ; John J. Moore, Auteur ; Brajendra Mishra, Auteur . - 2011 . - pp. 1554–1564. Métallurgie Langues : Anglais (eng) in Acta materialia > Vol. 58 N° 5 (Mars 2010) . - pp. 1554–1564 Mots-clés : TiBCN  coating  Nanocomposite  coating  Nanocrystalline  coating  Pulsed  magnetron  sputtering  Wear Résumé : TiBCN nanocomposite coatings were deposited in a closed field unbalanced magnetron sputtering system using pulsed magnetron sputtering of a TiBC compound target with various Ar/N2 mixtures. TiBCN coatings were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, nanoindentation, Rockwell C indentation and ball-on-disk wear tests. The coatings with a nitrogen content of less than 8 at.% exhibited superhardness values in the range of 44–49 GPa, but also showed poor adhesion and low wear resistance. Improvements in the coating adhesion, H/E ratio and wear resistance were achieved together with a decrease in the coating hardness to 35–45 GPa as the N content in the coatings was increased from 8 to 15 at.%. The microstructure of the coatings changed from a nano-columnar to a nanocomposite structure in which 5–8 nm nanocrystalline Ti(B,C) and Ti(N,C) compounds were embedded in an amorphous matrix consisting of BN, free carbon and CN phases. With a further increase in the N content in the coatings to levels greater than 20 at.%, the inter-particle spacing of the nanocrystalline compounds increased significantly due to the formation of a large amount of the amorphous BN phase, which also led to low hardness and poor wear resistance of the TiBCN coatings. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S1359645409007666