Documents disponibles écrits par cet auteur

Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C / Matthias Bensch in Acta materialia, Vol. 58 N° 5 (Mars 2010) 

Public ISBD [article]  in Acta materialia > Vol. 58 N° 5 (Mars 2010) . - pp. 1607–1617 Titre : Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C Type de document : texte imprimé Auteurs : Matthias Bensch, Auteur ; Johannes Preußner, Auteur ; Rainer Hüttner, Auteur Année de publication : 2011 Article en page(s) : pp. 1607–1617 Note générale : Métallurgie Langues : Anglais (eng) Mots-clés : Creep  Oxidation  Modelling  Thin-walled  structures  Nickel  alloy Résumé : Creep test results of thin-walled specimens of the single-crystal nickel-base superalloy René N5 at 980 °C under vacuum as well as under air show different creep properties depending on material thickness and atmosphere. The differences in creep strength and strain were analysed based on a creep-oxidation model. The model specifies the primary and secondary creep stages of thin-walled specimens by a sequence of layers. The model takes different zones affected by oxidation into account. Four layers were experimentally observed and considered in the model: oxide layer, γ′-free layer, γ′-reduced layer and the two-phase substrate in the sample as centre. Material parameters for growth laws of each layer were identified both by experimental analyses and by thermodynamic simulations. The final creep-oxidation model characterizes the creep behaviour of samples with small thicknesses and low initial stress with high accuracy. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S135964540900771X [article] Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C [texte imprimé] / Matthias Bensch, Auteur ; Johannes Preußner, Auteur ; Rainer Hüttner, Auteur . - 2011 . - pp. 1607–1617. Métallurgie Langues : Anglais (eng) in Acta materialia > Vol. 58 N° 5 (Mars 2010) . - pp. 1607–1617 Mots-clés : Creep  Oxidation  Modelling  Thin-walled  structures  Nickel  alloy Résumé : Creep test results of thin-walled specimens of the single-crystal nickel-base superalloy René N5 at 980 °C under vacuum as well as under air show different creep properties depending on material thickness and atmosphere. The differences in creep strength and strain were analysed based on a creep-oxidation model. The model specifies the primary and secondary creep stages of thin-walled specimens by a sequence of layers. The model takes different zones affected by oxidation into account. Four layers were experimentally observed and considered in the model: oxide layer, γ′-free layer, γ′-reduced layer and the two-phase substrate in the sample as centre. Material parameters for growth laws of each layer were identified both by experimental analyses and by thermodynamic simulations. The final creep-oxidation model characterizes the creep behaviour of samples with small thicknesses and low initial stress with high accuracy. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S135964540900771X