Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Lei Fu
Documents disponibles écrits par cet auteur
Affiner la rechercheAerodynamic design and numerical investigation on overall performance of a microradial turbine with millimeter-scale / Lei Fu in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 3 (Mars 2010)
[article]
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 3 (Mars 2010) . - 09 p.
Titre : Aerodynamic design and numerical investigation on overall performance of a microradial turbine with millimeter-scale Type de document : texte imprimé Auteurs : Lei Fu, Auteur ; Yan Shi, Auteur ; Qinghua Deng, Auteur Année de publication : 2010 Article en page(s) : 09 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Aerodynamics Blades Design engineering Flow separation Gas turbines Heat transfer Laminar to turbulent transitions Mach number Microfluidics Rotors Thermodynamics Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : For millimeter-scale microturbines, the principal challenge is to achieve a design scheme to meet the aerothermodynamics, geometry restriction, structural strength, and component functionality requirements while in consideration of the applicable materials, realizable manufacturing, and installation technology. This paper mainly presents numerical investigations on the aerothermodynamic design, geometrical design, and overall performance prediction of a millimeter-scale radial turbine with a rotor diameter of 10 mm. Four kinds of turbine rotor profiles were designed, and they were compared with one another in order to select the suitable profile for the microradial turbine. The leaving velocity loss in microgas turbines was found to be a large source of inefficiency. The approach of refining the geometric structure of rotor blades and the profile of diffuser were adopted to reduce the exit Mach number, thus improving the total-static efficiency. Different from general gas turbines, microgas turbines are operated in low Reynolds numbers (104–105), which has significant effect on flow separation, heat transfer, and laminar to turbulent flow transition. Based on the selected rotor profile, several microgas turbine configurations with different tip clearances of 0.1 mm, 0.2 mm, and 0.3 mm, two different isothermal wall conditions, and two laminar-turbulent transition models were investigated to understand the particular influences of low Reynolds numbers. These influences on the overall performance of the microgas turbine were analyzed in detail. The results indicate that these configurations should be included and emphasized during the design process of the millimeter-scale microradial turbines. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000132000003 [...] [article] Aerodynamic design and numerical investigation on overall performance of a microradial turbine with millimeter-scale [texte imprimé] / Lei Fu, Auteur ; Yan Shi, Auteur ; Qinghua Deng, Auteur . - 2010 . - 09 p.
Génie Mécanique
Langues : Anglais (eng)
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 3 (Mars 2010) . - 09 p.
Mots-clés : Aerodynamics Blades Design engineering Flow separation Gas turbines Heat transfer Laminar to turbulent transitions Mach number Microfluidics Rotors Thermodynamics Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : For millimeter-scale microturbines, the principal challenge is to achieve a design scheme to meet the aerothermodynamics, geometry restriction, structural strength, and component functionality requirements while in consideration of the applicable materials, realizable manufacturing, and installation technology. This paper mainly presents numerical investigations on the aerothermodynamic design, geometrical design, and overall performance prediction of a millimeter-scale radial turbine with a rotor diameter of 10 mm. Four kinds of turbine rotor profiles were designed, and they were compared with one another in order to select the suitable profile for the microradial turbine. The leaving velocity loss in microgas turbines was found to be a large source of inefficiency. The approach of refining the geometric structure of rotor blades and the profile of diffuser were adopted to reduce the exit Mach number, thus improving the total-static efficiency. Different from general gas turbines, microgas turbines are operated in low Reynolds numbers (104–105), which has significant effect on flow separation, heat transfer, and laminar to turbulent flow transition. Based on the selected rotor profile, several microgas turbine configurations with different tip clearances of 0.1 mm, 0.2 mm, and 0.3 mm, two different isothermal wall conditions, and two laminar-turbulent transition models were investigated to understand the particular influences of low Reynolds numbers. These influences on the overall performance of the microgas turbine were analyzed in detail. The results indicate that these configurations should be included and emphasized during the design process of the millimeter-scale microradial turbines. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000132000003 [...] Integrated optimization design for a radial turbine wheel of a 100 kW-class microturbin / Lei Fu in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 134 N° 1 (Janvier 2012)
[article]
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 1 (Janvier 2012) . - 08 p.
Titre : Integrated optimization design for a radial turbine wheel of a 100 kW-class microturbin Type de document : texte imprimé Auteurs : Lei Fu, Auteur ; Yan Shi, Auteur ; Qinghua Deng, Auteur ; Huaizhi Li, Auteur ; Zhenping Feng, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Génie mécanique Langues : Anglais (eng) Mots-clés : Finite element analysis Turbines Wheels Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The aerodynamic performance, structural strength, and wheel weight are three important factors in the design process of the radial turbine. This paper presents an investigation on these aspects and develops an optimization design approach for radial turbine with consideration of the three factors. The aerodynamic design for the turbine wheel with an inlet diameter of 230 mm for the 100 kW-class microturbine unit is carried out first as the original design. Then, the cylinder parabolic geometrical design method is applied to the wheel modeling and structural design, but the maximum stress predicted by finite element analysis greatly exceeds the yield limit of material. Further, the wheel weight is above 7.2 kg, thus, bringing some critical difficulties for bearing design and turbine operation. Therefore, an integrated optimization design method for radial turbine is studied and developed in this paper with focus on the wheel design. Meridional profiles and shape lines of the turbine wheel are optimized with consideration of the whole wheel weight. Main structural modeling parameters are reselected to reduce the wheel weight. Trade-off between aerodynamic performance and strength performance is highly emphasized during the optimization design. The results show that the optimized turbine wheel gets high aerodynamic performance and acceptable stress distribution with a weight less than 3.8 kg. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000001 [...] [article] Integrated optimization design for a radial turbine wheel of a 100 kW-class microturbin [texte imprimé] / Lei Fu, Auteur ; Yan Shi, Auteur ; Qinghua Deng, Auteur ; Huaizhi Li, Auteur ; Zhenping Feng, Auteur . - 2012 . - 08 p.
Génie mécanique
Langues : Anglais (eng)
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 1 (Janvier 2012) . - 08 p.
Mots-clés : Finite element analysis Turbines Wheels Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The aerodynamic performance, structural strength, and wheel weight are three important factors in the design process of the radial turbine. This paper presents an investigation on these aspects and develops an optimization design approach for radial turbine with consideration of the three factors. The aerodynamic design for the turbine wheel with an inlet diameter of 230 mm for the 100 kW-class microturbine unit is carried out first as the original design. Then, the cylinder parabolic geometrical design method is applied to the wheel modeling and structural design, but the maximum stress predicted by finite element analysis greatly exceeds the yield limit of material. Further, the wheel weight is above 7.2 kg, thus, bringing some critical difficulties for bearing design and turbine operation. Therefore, an integrated optimization design method for radial turbine is studied and developed in this paper with focus on the wheel design. Meridional profiles and shape lines of the turbine wheel are optimized with consideration of the whole wheel weight. Main structural modeling parameters are reselected to reduce the wheel weight. Trade-off between aerodynamic performance and strength performance is highly emphasized during the optimization design. The results show that the optimized turbine wheel gets high aerodynamic performance and acceptable stress distribution with a weight less than 3.8 kg. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000001 [...]