Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Martin Achmus
Documents disponibles écrits par cet auteur
Affiner la rechercheMinimum embedded length of cyclic horizontally loaded monopiles / Kuo, Yu-Chi in Journal of geotechnical and geoenvironmental engineering, Vol. 138 N° 3 (Mars 2012)
[article]
in Journal of geotechnical and geoenvironmental engineering > Vol. 138 N° 3 (Mars 2012) . - pp. 357-363
Titre : Minimum embedded length of cyclic horizontally loaded monopiles Type de document : texte imprimé Auteurs : Kuo, Yu-Chi, Auteur ; Martin Achmus, Auteur ; Khalid Abdel-Rahman, Auteur Année de publication : 2012 Article en page(s) : pp. 357-363 Note générale : Géotechnique Langues : Anglais (eng) Mots-clés : Piles Monopiles Cyclic loads Numerical analysis Finite element method Offshore structures Résumé : Monopiles are used as foundation structures for offshore wind energy towers. To ensure stable behavior of the monopile under cyclic loading conditions, a minimum embedded length is usually required. For this, different design criteria are used, some of which result in very large embedded depths for large-diameter monopiles. The suitability of these criteria is tested by means of numerical simulations. To account for cyclic loading, a new approach called the stiffness degradation method is applied. The results of a parametric study show that the design criteria used can indeed ensure optimum pile performance under static and cyclic loads. It is recommended that the requirement of a critical pile length, which leads to the minimum pile deflection under extreme load, is used as a design criterion. For the cases considered, this requirement results in only slightly greater cyclic deformations compared to the optimum case of very long piles. A further optimization of the required monopile length with respect to cyclic loading is possible, but requires specific consideration of cyclic behavior, as is done in this paper. DEWEY : 624.1 ISSN : 1090-0241 En ligne : http://ascelibrary.org/gto/resource/1/jggefk/v138/i3/p357_s1?isAuthorized=no [article] Minimum embedded length of cyclic horizontally loaded monopiles [texte imprimé] / Kuo, Yu-Chi, Auteur ; Martin Achmus, Auteur ; Khalid Abdel-Rahman, Auteur . - 2012 . - pp. 357-363.
Géotechnique
Langues : Anglais (eng)
in Journal of geotechnical and geoenvironmental engineering > Vol. 138 N° 3 (Mars 2012) . - pp. 357-363
Mots-clés : Piles Monopiles Cyclic loads Numerical analysis Finite element method Offshore structures Résumé : Monopiles are used as foundation structures for offshore wind energy towers. To ensure stable behavior of the monopile under cyclic loading conditions, a minimum embedded length is usually required. For this, different design criteria are used, some of which result in very large embedded depths for large-diameter monopiles. The suitability of these criteria is tested by means of numerical simulations. To account for cyclic loading, a new approach called the stiffness degradation method is applied. The results of a parametric study show that the design criteria used can indeed ensure optimum pile performance under static and cyclic loads. It is recommended that the requirement of a critical pile length, which leads to the minimum pile deflection under extreme load, is used as a design criterion. For the cases considered, this requirement results in only slightly greater cyclic deformations compared to the optimum case of very long piles. A further optimization of the required monopile length with respect to cyclic loading is possible, but requires specific consideration of cyclic behavior, as is done in this paper. DEWEY : 624.1 ISSN : 1090-0241 En ligne : http://ascelibrary.org/gto/resource/1/jggefk/v138/i3/p357_s1?isAuthorized=no