Stick–slip behavior of serrated flow during inhomogeneous deformation of bulk metallic glasses / Florian H. Dalla Torre in Acta materialia, Vol. 58 N° 10 (Juin 2010)  

Public ISBD [article]  inActa materialia > Vol. 58 N° 10 (Juin 2010) . - pp. 3742–3750 Titre : Stick–slip behavior of serrated flow during inhomogeneous deformation of bulk metallic glasses Type de document : texte imprimé Auteurs : Florian H. Dalla Torre, Auteur ; David Klaumünzer, Auteur ; Robert Maaß, Auteur Année de publication : 2011 Article en page(s) : pp. 3742–3750 Note générale : Métallurgie Langues : Anglais (eng) Mots-clés : Bulk metallic glasses Serrated flow Viscosity Shear banding Acoustic emission Résumé : Accurate compression tests with a piezoelectric load cell and an acquisition rate of up to 10 kHz were performed on a Zr-based bulk metallic glass in the temperature range 210–320 K at a strain rate of 10−3 s−1. Information about the stress drop magnitude and the associated size of shear displacements as a function of temperature and strain provides detailed insights into the shear band characteristics, which can be described by a stick–slip process. The average shear slip displacement is on average about 1–2 μm, irrespective of temperature, whereas the associated slip time (or stress drop time) increases from ∼1 ms at 320 K to ∼0.4 s at 213 K, yielding values on the deformation kinetics and the shear viscosity. Scanning electron microscopy investigations on shear surfaces and in situ acoustic emission measurements provide further understanding into the complex multistep shear slip process. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S1359645410001564 [article] Stick–slip behavior of serrated flow during inhomogeneous deformation of bulk metallic glasses [texte imprimé] / Florian H. Dalla Torre, Auteur ; David Klaumünzer, Auteur ; Robert Maaß, Auteur . - 2011 . - pp. 3742–3750. Métallurgie Langues : Anglais (eng) in Acta materialia > Vol. 58 N° 10 (Juin 2010) . - pp. 3742–3750 Mots-clés : Bulk metallic glasses Serrated flow Viscosity Shear banding Acoustic emission Résumé : Accurate compression tests with a piezoelectric load cell and an acquisition rate of up to 10 kHz were performed on a Zr-based bulk metallic glass in the temperature range 210–320 K at a strain rate of 10−3 s−1. Information about the stress drop magnitude and the associated size of shear displacements as a function of temperature and strain provides detailed insights into the shear band characteristics, which can be described by a stick–slip process. The average shear slip displacement is on average about 1–2 μm, irrespective of temperature, whereas the associated slip time (or stress drop time) increases from ∼1 ms at 320 K to ∼0.4 s at 213 K, yielding values on the deformation kinetics and the shear viscosity. Scanning electron microscopy investigations on shear surfaces and in situ acoustic emission measurements provide further understanding into the complex multistep shear slip process. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S1359645410001564

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire