Load and stress analysis for the swash plate of an axial piston pump/motor / M. Z. Norhirni in Transactions of the ASME . Journal of dynamic systems, measurement, and control, Vol. 133 N° 6 (Novembre 2011)  

Public ISBD [article]  inTransactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 133 N° 6 (Novembre 2011) . - 10 p. Titre : Load and stress analysis for the swash plate of an axial piston pump/motor Type de document : texte imprimé Auteurs : M. Z. Norhirni, Auteur ; Hamdi, M., Auteur ; S. Nurmaya Musa, Auteur Année de publication : 2012 Article en page(s) : 10 p. Note générale : Dynamic systems Langues : Anglais (eng) Mots-clés : Braking Force control Hybrid electric vehicles Hydraulic systems Pistons Plates (structures) Pumps Shear modulus Stress analysis Torque Index. décimale : 553 Géologie économique. Minérographie. Minéraux. Formation et gisements de minerais Résumé : In an axial piston pump design, the swash plate plays an important role in controlling the displacement of the pump, especially in a closed loop system. In this paper, the axial piston pump is incorporated into the design of a hydraulic regenerative braking system for hybrid vehicles. The pump in this configuration should function in dual mode, as a pump and as a motor. For this to occur, the swash plate should swing in two opposite directions. The swash plate presented in this paper is designed for stability and ease of control. Analytical analysis of torque and forces were conducted using MATLAB software to verify the motion of the swash plate. Furthermore, finite element analysis was also carried out to evaluate the rigidity and stress in the system. The analytical evaluation has shown that as the swash plate angle increases, the required control force and torque increase almost linearly. However, the change of the plate angle was found to have no effect on the force exerted on the X-axis and the torque exerted on the Z-axis. DEWEY : 553 ISSN : 0022-0434 En ligne : http://www.asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA00013300 [...] [article] Load and stress analysis for the swash plate of an axial piston pump/motor [texte imprimé] / M. Z. Norhirni, Auteur ; Hamdi, M., Auteur ; S. Nurmaya Musa, Auteur . - 2012 . - 10 p. Dynamic systems Langues : Anglais (eng) in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 133 N° 6 (Novembre 2011) . - 10 p. Mots-clés : Braking Force control Hybrid electric vehicles Hydraulic systems Pistons Plates (structures) Pumps Shear modulus Stress analysis Torque Index. décimale : 553 Géologie économique. Minérographie. Minéraux. Formation et gisements de minerais Résumé : In an axial piston pump design, the swash plate plays an important role in controlling the displacement of the pump, especially in a closed loop system. In this paper, the axial piston pump is incorporated into the design of a hydraulic regenerative braking system for hybrid vehicles. The pump in this configuration should function in dual mode, as a pump and as a motor. For this to occur, the swash plate should swing in two opposite directions. The swash plate presented in this paper is designed for stability and ease of control. Analytical analysis of torque and forces were conducted using MATLAB software to verify the motion of the swash plate. Furthermore, finite element analysis was also carried out to evaluate the rigidity and stress in the system. The analytical evaluation has shown that as the swash plate angle increases, the required control force and torque increase almost linearly. However, the change of the plate angle was found to have no effect on the force exerted on the X-axis and the torque exerted on the Z-axis. DEWEY : 553 ISSN : 0022-0434 En ligne : http://www.asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA00013300 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire