Documents disponibles écrits par cet auteur

Oscillation loop for a vibratory gyroscope and its experiment study / Liu Heng in Transactions of the ASME . Journal of dynamic systems, measurement, and control, Vol. 134 N° 1 (Janvier 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 134 N° 1 (Janvier 2012) . - 08 p. Titre : Oscillation loop for a vibratory gyroscope and its experiment study Type de document : texte imprimé Auteurs : Liu Heng, Auteur ; Wei Su, Auteur ; Zhang Fu-tang, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Dynamic systems Langues : Anglais (eng) Mots-clés : Gain  control  Gyroscopes  Vibrations Index. décimale : 553 Géologie économique. Minérographie. Minéraux. Formation et gisements de minerais Résumé : This paper investigates the design of a self-oscillation loop for the gyroscope system. The dynamic equations describing this system are analyzed using the method of averaging, and a criterion for selecting the circuit parameters is established based on the analysis. The validity of the criterion and the effectiveness of the control scheme are verified by the experimental results obtained from the control parameters that satisfy or violate the stability criterion. The performance of the self-oscillation loop with a z-axis gyroscope is also evaluated in light of the experimental results. The self-oscillation loop based on the auto gain control scheme effectively tracks the resonance frequency of a z-axis gyroscope. This frequency corresponds to a standard Allan variance of 0.04 Hz in 8 min at natural frequency. The output signal-to-noise ratio (SNR) is about 90 dB, and the vibratory velocity amplitude shows a deviation of 0.5% in 8 min. DEWEY : 553 ISSN : 0022-0434 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA000134000001 [...] [article] Oscillation loop for a vibratory gyroscope and its experiment study [texte imprimé] / Liu Heng, Auteur ; Wei Su, Auteur ; Zhang Fu-tang, Auteur . - 2012 . - 08 p. Dynamic systems Langues : Anglais (eng) in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 134 N° 1 (Janvier 2012) . - 08 p. Mots-clés : Gain  control  Gyroscopes  Vibrations Index. décimale : 553 Géologie économique. Minérographie. Minéraux. Formation et gisements de minerais Résumé : This paper investigates the design of a self-oscillation loop for the gyroscope system. The dynamic equations describing this system are analyzed using the method of averaging, and a criterion for selecting the circuit parameters is established based on the analysis. The validity of the criterion and the effectiveness of the control scheme are verified by the experimental results obtained from the control parameters that satisfy or violate the stability criterion. The performance of the self-oscillation loop with a z-axis gyroscope is also evaluated in light of the experimental results. The self-oscillation loop based on the auto gain control scheme effectively tracks the resonance frequency of a z-axis gyroscope. This frequency corresponds to a standard Allan variance of 0.04 Hz in 8 min at natural frequency. The output signal-to-noise ratio (SNR) is about 90 dB, and the vibratory velocity amplitude shows a deviation of 0.5% in 8 min. DEWEY : 553 ISSN : 0022-0434 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA000134000001 [...]