Documents disponibles écrits par cet auteur

Morphology and catalytic performance of flake - shaped NiO - yttria - stabilized zirconia (YSZ) particles with nanocrystalline YSZ grains / Yuzhou Wu in Industrial & engineering chemistry research, Vol. 51 N° 18 (Mai 2012) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 51 N° 18 (Mai 2012) . - pp. 6387-6394 Titre : Morphology and catalytic performance of flake - shaped NiO - yttria - stabilized zirconia (YSZ) particles with nanocrystalline YSZ grains Type de document : texte imprimé Auteurs : Yuzhou Wu, Auteur ; Wang, Wei, Auteur ; Kun Wang, Auteur Année de publication : 2012 Article en page(s) : pp. 6387-6394 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Catalytic  reaction  Morphology Résumé : The flake-shaped NiO-yttria-stabilized zirconia (YSZ) particles with nanocrystalline YSZ grains were synthesized using the sucrose-concentrated H2SO4, dehydration reaction, and their microstructure was characterized by scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). To evaluate the properties of the flakeshaped NiO-YSZ particles as the anode materials for solid oxide fuel cells, the reduction temperature of the flake-shaped NiO-YSZ particles and catalytic activity on the methane steam/CO2 reforming reactions of the H2-reduced particles as well as the electrochemical impedance spectra of the YSZ supported symmetrical cells with the electrodes made from these particles were examined in comparison with the mixed commercial NiO-YSZ. HRTEM revealed that the nanocrystalline YSZ was dispersed in the NiO matrix and distributed on the surface of the flake-shaped NiO-YSZ particles. The catalytic performance of the flake-shaped NiO-YSZ particles was better than that of the mixed commercial NiO-YSZ in both steam reforming and CO2 reforming of methane. The symmetrical cell made from the flake-shaped NiO-YSZ exhibited a much lower polarization resistance at the operating temperatures below 800 °C than that made from the mixed commercial NiO-YSZ. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=25867290 [article] Morphology and catalytic performance of flake - shaped NiO - yttria - stabilized zirconia (YSZ) particles with nanocrystalline YSZ grains [texte imprimé] / Yuzhou Wu, Auteur ; Wang, Wei, Auteur ; Kun Wang, Auteur . - 2012 . - pp. 6387-6394. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 18 (Mai 2012) . - pp. 6387-6394 Mots-clés : Catalytic  reaction  Morphology Résumé : The flake-shaped NiO-yttria-stabilized zirconia (YSZ) particles with nanocrystalline YSZ grains were synthesized using the sucrose-concentrated H2SO4, dehydration reaction, and their microstructure was characterized by scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). To evaluate the properties of the flakeshaped NiO-YSZ particles as the anode materials for solid oxide fuel cells, the reduction temperature of the flake-shaped NiO-YSZ particles and catalytic activity on the methane steam/CO2 reforming reactions of the H2-reduced particles as well as the electrochemical impedance spectra of the YSZ supported symmetrical cells with the electrodes made from these particles were examined in comparison with the mixed commercial NiO-YSZ. HRTEM revealed that the nanocrystalline YSZ was dispersed in the NiO matrix and distributed on the surface of the flake-shaped NiO-YSZ particles. The catalytic performance of the flake-shaped NiO-YSZ particles was better than that of the mixed commercial NiO-YSZ in both steam reforming and CO2 reforming of methane. The symmetrical cell made from the flake-shaped NiO-YSZ exhibited a much lower polarization resistance at the operating temperatures below 800 °C than that made from the mixed commercial NiO-YSZ. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=25867290