Mass transfer from single drops and the influence of temperature / Javad Saien in Industrial & engineering chemistry research, Vol. 51 N° 21 (Mai 2012)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 51 N° 21 (Mai 2012) . - pp. 7364–7372 Titre : Mass transfer from single drops and the influence of temperature Type de document : texte imprimé Auteurs : Javad Saien, Auteur ; Shabnam Daliri, Auteur Année de publication : 2012 Article en page(s) : pp. 7364–7372 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Mass transfer Résumé : Temperature can alter the performance of conventional liquid–liquid extraction columns in which one phase is dispersed inside another phase. In this research, the influence of temperature on the extraction process was investigated using a toluene–acetic acid–water chemical system with dominant mass transfer resistance in the organic phase. Single drop experiments with a range of drop size within 2.49–3.77 mm and temperature within 15–40 °C were performed. Results demonstrate significant impact of temperature on the rate of mass transfer with an average enhancement of 93.6% in overall mass transfer coefficient while small drops are benefited more. Having lower contributions by drop size and terminal velocity, the extraction efficiency is the most effective term in this regard which itself is increased by increasing molecular diffusivity in the organic dispersed phase. For the aim of modeling, effective diffusivity was substituted for molecular diffusivity in Newman’s equation and consequently, a reliable empirical equation was derived for the enhancement factor of diffusivity as a function of dimensionless variables. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie300649d [article] Mass transfer from single drops and the influence of temperature [texte imprimé] / Javad Saien, Auteur ; Shabnam Daliri, Auteur . - 2012 . - pp. 7364–7372. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 21 (Mai 2012) . - pp. 7364–7372 Mots-clés : Mass transfer Résumé : Temperature can alter the performance of conventional liquid–liquid extraction columns in which one phase is dispersed inside another phase. In this research, the influence of temperature on the extraction process was investigated using a toluene–acetic acid–water chemical system with dominant mass transfer resistance in the organic phase. Single drop experiments with a range of drop size within 2.49–3.77 mm and temperature within 15–40 °C were performed. Results demonstrate significant impact of temperature on the rate of mass transfer with an average enhancement of 93.6% in overall mass transfer coefficient while small drops are benefited more. Having lower contributions by drop size and terminal velocity, the extraction efficiency is the most effective term in this regard which itself is increased by increasing molecular diffusivity in the organic dispersed phase. For the aim of modeling, effective diffusivity was substituted for molecular diffusivity in Newman’s equation and consequently, a reliable empirical equation was derived for the enhancement factor of diffusivity as a function of dimensionless variables. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie300649d

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire