Documents disponibles écrits par cet auteur

Comparative validation study on identification of premixed flame transfer function / Luis Tay-Wo-Chong in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 134 N° 2 (Février 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 2 (Février 2012) . - 08 p. Titre : Comparative validation study on identification of premixed flame transfer function Type de document : texte imprimé Auteurs : Luis Tay-Wo-Chong, Auteur ; Sebastian Bomberg, Auteur ; Ahtsham Ulhaq, Auteur ; Thomas Komarek, Auteur ; Wolfgang Polifke, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Génie mécanique Langues : Anglais (eng) Mots-clés : Combustion  Combustion  equipment  Computational  fluid  dynamics  Eigenvalues  and  eigenfunctions  Flames  Flow  instability  Flow  simulation  Navier-Stokes  equations  Transfer  functions  Turbulence Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The flame transfer function (FTF) of a premixed swirl burner was identified from a time series generated with computational fluid dynamics simulations of compressible, turbulent, reacting flow at nonadiabatic conditions. Results were validated against experimental data. For large eddy simulation (LES), the dynamically thickened flame combustion model with one step kinetics was used. For unsteady simulation in a Reynolds-averaged Navier–Stokes framework (URANS), the Turbulent Flame Closure model was employed. The FTF identified from LES shows quantitative agreement with experiment for amplitude and phase, especially for frequencies below 200 Hz. At higher frequencies, the gain of the FTF is underpredicted. URANS results show good qualitative agreement, capturing the main features of the flame response. However, the maximum amplitude and the phase lag of the FTF are underpredicted. Using a low-order network model of the test rig, the impact of the discrepancies in predicted FTFs on frequencies and growth rates of the lowest order eigenmodes were assessed. Small differences in predicted FTFs were found to have a significant impact on stability limits. Stability behavior in agreement with experimental data was achieved only with the LES-based flame transfer function. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000002 [...] [article] Comparative validation study on identification of premixed flame transfer function [texte imprimé] / Luis Tay-Wo-Chong, Auteur ; Sebastian Bomberg, Auteur ; Ahtsham Ulhaq, Auteur ; Thomas Komarek, Auteur ; Wolfgang Polifke, Auteur . - 2012 . - 08 p. Génie mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 2 (Février 2012) . - 08 p. Mots-clés : Combustion  Combustion  equipment  Computational  fluid  dynamics  Eigenvalues  and  eigenfunctions  Flames  Flow  instability  Flow  simulation  Navier-Stokes  equations  Transfer  functions  Turbulence Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The flame transfer function (FTF) of a premixed swirl burner was identified from a time series generated with computational fluid dynamics simulations of compressible, turbulent, reacting flow at nonadiabatic conditions. Results were validated against experimental data. For large eddy simulation (LES), the dynamically thickened flame combustion model with one step kinetics was used. For unsteady simulation in a Reynolds-averaged Navier–Stokes framework (URANS), the Turbulent Flame Closure model was employed. The FTF identified from LES shows quantitative agreement with experiment for amplitude and phase, especially for frequencies below 200 Hz. At higher frequencies, the gain of the FTF is underpredicted. URANS results show good qualitative agreement, capturing the main features of the flame response. However, the maximum amplitude and the phase lag of the FTF are underpredicted. Using a low-order network model of the test rig, the impact of the discrepancies in predicted FTFs on frequencies and growth rates of the lowest order eigenmodes were assessed. Small differences in predicted FTFs were found to have a significant impact on stability limits. Stability behavior in agreement with experimental data was achieved only with the LES-based flame transfer function. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000002 [...]