Documents disponibles écrits par cet auteur

An energy-based axial isothermal-mechanical fatigue lifing method / John Wertz in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 134 N° 10 (Octobre 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 10 (Octobre 2012) . - 07 p. Titre : An energy-based axial isothermal-mechanical fatigue lifing method Type de document : texte imprimé Auteurs : John Wertz, Auteur ; Todd Letcher, Auteur ; M.-H. Herman Shen, Auteur Année de publication : 2012 Article en page(s) : 07 p. Note générale : gas turbines Langues : Anglais (eng) Mots-clés : energy-based  fatigue  lifing  method;  axial  isothermal-mechanical  fatigue  (IMF); Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : An energy-based fatigue lifing method for the determination of the full-life and critical-life of in-service structures subjected to axial isothermal-mechanical fatigue (IMF) has been developed. The foundation of this procedure is the energy-based axial room-temperature lifing model, which states: the total strain energy dissipated during both a quasi-static process and a dynamic (fatigue) process is the same material property. The axial IMF lifing framework is composed of the following entities: (1) the development of an axial IMF testing capability; (2) the creation of a testing procedure capable of assessing the strain energy dissipated during both a quasi-static process and a dynamic process at elevated temperatures; and (3) the incorporation of the effect of thermal loading into the axial fatigue lifing model. Both an axial IMF capability and a detailed testing procedure were created. The axial IMF capability was employed to produce full-life and critical-life predictions as functions of temperature, which were shown to have an excellent correlation with experimental fatigue data. For the highest operating temperature, the axial IMF full-life prediction was compared to lifing predictions made by both the universal slopes and the uniform material law prediction and was found to be more accurate at an elevated temperature. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000010 [...] [article] An energy-based axial isothermal-mechanical fatigue lifing method [texte imprimé] / John Wertz, Auteur ; Todd Letcher, Auteur ; M.-H. Herman Shen, Auteur . - 2012 . - 07 p. gas turbines Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 10 (Octobre 2012) . - 07 p. Mots-clés : energy-based  fatigue  lifing  method;  axial  isothermal-mechanical  fatigue  (IMF); Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : An energy-based fatigue lifing method for the determination of the full-life and critical-life of in-service structures subjected to axial isothermal-mechanical fatigue (IMF) has been developed. The foundation of this procedure is the energy-based axial room-temperature lifing model, which states: the total strain energy dissipated during both a quasi-static process and a dynamic (fatigue) process is the same material property. The axial IMF lifing framework is composed of the following entities: (1) the development of an axial IMF testing capability; (2) the creation of a testing procedure capable of assessing the strain energy dissipated during both a quasi-static process and a dynamic process at elevated temperatures; and (3) the incorporation of the effect of thermal loading into the axial fatigue lifing model. Both an axial IMF capability and a detailed testing procedure were created. The axial IMF capability was employed to produce full-life and critical-life predictions as functions of temperature, which were shown to have an excellent correlation with experimental fatigue data. For the highest operating temperature, the axial IMF full-life prediction was compared to lifing predictions made by both the universal slopes and the uniform material law prediction and was found to be more accurate at an elevated temperature. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000010 [...]

An energy-based axial isothermal- mechanical fatigue lifing procedure / John Wertz in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 134 N° 2 (Février 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 2 (Février 2012) . - 05 p. Titre : An energy-based axial isothermal- mechanical fatigue lifing procedure Type de document : texte imprimé Auteurs : John Wertz, Auteur ; M.-H. Herman Shen, Auteur ; Onome Scott-Emuakpor, Auteur ; Tommy George, Auteur Année de publication : 2012 Article en page(s) : 05 p. Note générale : Génie mécanique Langues : Anglais (eng) Mots-clés : Creep  Fatigue  Lifts  Structural  engineering Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : An energy-based fatigue lifing procedure for the determination of full-life and critical-life of in-service structures subjected to axial isothermal-mechanical fatigue (IMF) has been developed. The foundation of this procedure is the energy-based axial room-temperature fatigue model, which states: the total strain energy density accumulated during both a monotonic fracture event and a fatigue process is the same material property. The energy-based axial IMF lifing framework is composed of the following entities: (1) the development of an axial IMF testing capability; (2) the creation of a testing procedure capable of assessing the strain energy accrued during both a monotonic fracture process and a fatigue process at various elevated temperatures; and (3), the incorporation of the effect of temperature into the axial fatigue lifing model. Both an axial IMF capability and a detailed testing procedure were created. The axial IMF capability was employed in conjunction with the monotonic fracture curve testing procedure to produce fifteen fracture curves at four operating temperatures. The strain energy densities for these fracture curves were compared, leading to the assumption of constant monotonic fracture energy at operating temperatures below the creep activation temperature. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000002 [...] [article] An energy-based axial isothermal- mechanical fatigue lifing procedure [texte imprimé] / John Wertz, Auteur ; M.-H. Herman Shen, Auteur ; Onome Scott-Emuakpor, Auteur ; Tommy George, Auteur . - 2012 . - 05 p. Génie mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 2 (Février 2012) . - 05 p. Mots-clés : Creep  Fatigue  Lifts  Structural  engineering Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : An energy-based fatigue lifing procedure for the determination of full-life and critical-life of in-service structures subjected to axial isothermal-mechanical fatigue (IMF) has been developed. The foundation of this procedure is the energy-based axial room-temperature fatigue model, which states: the total strain energy density accumulated during both a monotonic fracture event and a fatigue process is the same material property. The energy-based axial IMF lifing framework is composed of the following entities: (1) the development of an axial IMF testing capability; (2) the creation of a testing procedure capable of assessing the strain energy accrued during both a monotonic fracture process and a fatigue process at various elevated temperatures; and (3), the incorporation of the effect of temperature into the axial fatigue lifing model. Both an axial IMF capability and a detailed testing procedure were created. The axial IMF capability was employed in conjunction with the monotonic fracture curve testing procedure to produce fifteen fracture curves at four operating temperatures. The strain energy densities for these fracture curves were compared, leading to the assumption of constant monotonic fracture energy at operating temperatures below the creep activation temperature. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000002 [...]