Irregularities in product distribution of fischer – tropsch synthesis due to experimental artifact / Junhu Gao in Industrial & engineering chemistry research, Vol. 51 N° 36 (Septembre 2012)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 51 N° 36 (Septembre 2012) . - pp. 11618-11628 Titre : Irregularities in product distribution of fischer – tropsch synthesis due to experimental artifact Type de document : texte imprimé Auteurs : Junhu Gao, Auteur ; Baoshan Wu, Auteur ; Liping Zhou, Auteur Année de publication : 2012 Article en page(s) : pp. 11618-11628 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Fischer Tropsch synthesis Résumé : Experimental product distribution of Fischer—Tropsch synthesis frequently presents notable deviations from the typical double-a Anderson―Schulz—Flory pattern: bump or dip around the breaking carbon number, positive or negative deviation for heavy hydrocarbons. These irregularities were studied experimentally in a fixed-bed reactor over an industrial Fe/ Mn catalyst, and theoretically by a product separation model based on Aspen Plus software. First, it was found that the unsteady state of reaction condition or improper gas chromatograph procedure could lead to deviation for heavy hydrocarbon distribution. Second, the bump near the breaking carbon number could be attributed to the accumulation of water in hot trap, which leads to an inaccurate measurement of the wax amount. This irregularity can be eliminated by selecting either a higher temperature or a lower pressure of the hot trap. Third, vaporization or flash loss of the oil sample during product collection could result in dip in light hydrocarbon distribution. High syngas conversion levels should be avoided for accurate data acquirement. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26350327 [article] Irregularities in product distribution of fischer – tropsch synthesis due to experimental artifact [texte imprimé] / Junhu Gao, Auteur ; Baoshan Wu, Auteur ; Liping Zhou, Auteur . - 2012 . - pp. 11618-11628. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 36 (Septembre 2012) . - pp. 11618-11628 Mots-clés : Fischer Tropsch synthesis Résumé : Experimental product distribution of Fischer—Tropsch synthesis frequently presents notable deviations from the typical double-a Anderson―Schulz—Flory pattern: bump or dip around the breaking carbon number, positive or negative deviation for heavy hydrocarbons. These irregularities were studied experimentally in a fixed-bed reactor over an industrial Fe/ Mn catalyst, and theoretically by a product separation model based on Aspen Plus software. First, it was found that the unsteady state of reaction condition or improper gas chromatograph procedure could lead to deviation for heavy hydrocarbon distribution. Second, the bump near the breaking carbon number could be attributed to the accumulation of water in hot trap, which leads to an inaccurate measurement of the wax amount. This irregularity can be eliminated by selecting either a higher temperature or a lower pressure of the hot trap. Third, vaporization or flash loss of the oil sample during product collection could result in dip in light hydrocarbon distribution. High syngas conversion levels should be avoided for accurate data acquirement. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26350327

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire