Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Sarada Prasad Kundu
Documents disponibles écrits par cet auteur
Affiner la rechercheAdsorption of anionic - azo dye from aqueous solution by lignocellulose - biomass jute fiber / Aparna Roy in Industrial & engineering chemistry research, Vol. 51 N° 37 (Septembre 2012)
[article]
in Industrial & engineering chemistry research > Vol. 51 N° 37 (Septembre 2012) . - pp. 12095–12106
Titre : Adsorption of anionic - azo dye from aqueous solution by lignocellulose - biomass jute fiber : Equilibrium, kinetics, and thermodynamics study Type de document : texte imprimé Auteurs : Aparna Roy, Auteur ; Sumit Chakraborty, Auteur ; Sarada Prasad Kundu, Auteur Année de publication : 2012 Article en page(s) : pp. 12095–12106 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Adsorption Aqueous solution Kinetics Thermodynamics Résumé : The present investigation describes the evaluation of feasibility of lignocellulosic-biomass jute fiber (JF) toward adsorptive removal of anionic-azo dye from aqueous solution. Batch studies illustrated that dye uptake was highly dependent on different process variables, pH, initial dye concentration of solution, adsorbent dosage, and temperature. Further, an attempt has been taken to correlate these process variables with dye absorption and was optimized through a full-factorial central composite design (CCD) in response surface methodology (RSM). Maximum adsorption capacity (29.697 mg/g) under optimum conditions of variables (pH 3.91, adsorbent dose 2.04 g/L, adsorbate concentration 244.05 mg/L, and temperature 30 °C), as predicted by RSM, was found to be very close to the experimentally determined value (28.940 mg/g). Exothermic and spontaneous nature of adsorption was revealed from thermodynamic study. Equilibrium adsorption data were highly consistent with Langmuir isotherm yielding R2 = 0.999. Kinetic studies revealed that adsorption followed pseudo second-order model regarding the intraparticle diffusion. Activation parameters for the adsorption process were computed using Arrhenius and Eyring equations. Maximum desorption efficiency of spent adsorbent was achieved using sodium hydroxide solution (0.1 M). ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie301708e [article] Adsorption of anionic - azo dye from aqueous solution by lignocellulose - biomass jute fiber : Equilibrium, kinetics, and thermodynamics study [texte imprimé] / Aparna Roy, Auteur ; Sumit Chakraborty, Auteur ; Sarada Prasad Kundu, Auteur . - 2012 . - pp. 12095–12106.
Industrial chemistry
Langues : Anglais (eng)
in Industrial & engineering chemistry research > Vol. 51 N° 37 (Septembre 2012) . - pp. 12095–12106
Mots-clés : Adsorption Aqueous solution Kinetics Thermodynamics Résumé : The present investigation describes the evaluation of feasibility of lignocellulosic-biomass jute fiber (JF) toward adsorptive removal of anionic-azo dye from aqueous solution. Batch studies illustrated that dye uptake was highly dependent on different process variables, pH, initial dye concentration of solution, adsorbent dosage, and temperature. Further, an attempt has been taken to correlate these process variables with dye absorption and was optimized through a full-factorial central composite design (CCD) in response surface methodology (RSM). Maximum adsorption capacity (29.697 mg/g) under optimum conditions of variables (pH 3.91, adsorbent dose 2.04 g/L, adsorbate concentration 244.05 mg/L, and temperature 30 °C), as predicted by RSM, was found to be very close to the experimentally determined value (28.940 mg/g). Exothermic and spontaneous nature of adsorption was revealed from thermodynamic study. Equilibrium adsorption data were highly consistent with Langmuir isotherm yielding R2 = 0.999. Kinetic studies revealed that adsorption followed pseudo second-order model regarding the intraparticle diffusion. Activation parameters for the adsorption process were computed using Arrhenius and Eyring equations. Maximum desorption efficiency of spent adsorbent was achieved using sodium hydroxide solution (0.1 M). ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie301708e