Documents disponibles écrits par cet auteur

Solid phasepre - concentration of cobalt (II) using pyridine – thiocyanate reagents / Raja Saha in Chemical engineering journal, Vol. 174 N° 1 (Octobre 2011) 

Public ISBD [article]  in Chemical engineering journal > Vol. 174 N° 1 (Octobre 2011) . - pp.58-67 Titre : Solid phasepre - concentration of cobalt (II) using pyridine – thiocyanate reagents : X - ray crystal structure of the extracted ternary cobalt (II) complex Type de document : texte imprimé Auteurs : Raja Saha, Auteur ; Animesh Sahana, Auteur ; Sudipta Das, Auteur Année de publication : 2012 Article en page(s) : pp.58-67 Note générale : Génie chimique Langues : Anglais (eng) Mots-clés : Co(II)  Pyridine-2,6-dimethanol  Thiocyanate  Crystalstructure  Chelation  Flame  atomic  absorption  spectrometry Résumé : Mixture of pyridine-2,6-dimethanol (PDM) and thiocyanate (SCN−) (1:1, mole ratio) immobilized on silica served as a very efficient sorbent for selective retention of Co(II) from other associated metal ions at trace level. The maximum sorption capacity for Co(II) was found to be 0.203 mmol g−1 at pH 9.0. Sorbed Co(II) was completely eluted by 3.5 mL of 3 mol L−1 HCl and measured using flame atomic absorption spectrometer (FAAS). The structure of the extracted Co(II) complex was confirmed by single crystalX-raystructure and Fourier transform infrared (FTIR) spectroscopy. Thermo gravimetric analysis (TGA) of the chelated Co(II) complex revealed its stability at the optimum extraction temperature (55 °C). The method was reproducible with a relative standard deviation (RSD) of 0.6% (N = 10) with three sigma detection limit (N = 10) of 0.6 μg g−1. A pre-concentration factor, 94 was achieved. Interferences from Mn2+ and Cu2+ ions were eliminated by prior oxidation of Mn2+ by KIO4 to MnO4− and masking of Cu2+ with NH4SCN, respectively. A plausible mechanism for the selective extraction of Co(II) was attributed to the formation of a first order water insoluble inner–metallic complex as confirmed by the single crystalX-raystructure analysis. The developed method has been tested for trace level separation and estimation of cobalt in some certified reference materials. Analyses of some biological and environmental samples were performed. ISSN : 1385-8947 En ligne : http://www.sciencedirect.com/science/article/pii/S1385894711009910 [article] Solid phasepre - concentration of cobalt (II) using pyridine – thiocyanate reagents : X - ray crystal structure of the extracted ternary cobalt (II) complex [texte imprimé] / Raja Saha, Auteur ; Animesh Sahana, Auteur ; Sudipta Das, Auteur . - 2012 . - pp.58-67. Génie chimique Langues : Anglais (eng) in Chemical engineering journal > Vol. 174 N° 1 (Octobre 2011) . - pp.58-67 Mots-clés : Co(II)  Pyridine-2,6-dimethanol  Thiocyanate  Crystalstructure  Chelation  Flame  atomic  absorption  spectrometry Résumé : Mixture of pyridine-2,6-dimethanol (PDM) and thiocyanate (SCN−) (1:1, mole ratio) immobilized on silica served as a very efficient sorbent for selective retention of Co(II) from other associated metal ions at trace level. The maximum sorption capacity for Co(II) was found to be 0.203 mmol g−1 at pH 9.0. Sorbed Co(II) was completely eluted by 3.5 mL of 3 mol L−1 HCl and measured using flame atomic absorption spectrometer (FAAS). The structure of the extracted Co(II) complex was confirmed by single crystalX-raystructure and Fourier transform infrared (FTIR) spectroscopy. Thermo gravimetric analysis (TGA) of the chelated Co(II) complex revealed its stability at the optimum extraction temperature (55 °C). The method was reproducible with a relative standard deviation (RSD) of 0.6% (N = 10) with three sigma detection limit (N = 10) of 0.6 μg g−1. A pre-concentration factor, 94 was achieved. Interferences from Mn2+ and Cu2+ ions were eliminated by prior oxidation of Mn2+ by KIO4 to MnO4− and masking of Cu2+ with NH4SCN, respectively. A plausible mechanism for the selective extraction of Co(II) was attributed to the formation of a first order water insoluble inner–metallic complex as confirmed by the single crystalX-raystructure analysis. The developed method has been tested for trace level separation and estimation of cobalt in some certified reference materials. Analyses of some biological and environmental samples were performed. ISSN : 1385-8947 En ligne : http://www.sciencedirect.com/science/article/pii/S1385894711009910