Documents disponibles écrits par cet auteur

Alternate coating and porosity as dependent factors for the photocatalytic activity of sol – gel derived TiO2 films / Suhas R. Patil in Chemical engineering journal, Vol. 174 N° 1 (Octobre 2011) 

Public ISBD [article]  in Chemical engineering journal > Vol. 174 N° 1 (Octobre 2011) . - pp.190–198 Titre : Alternate coating and porosity as dependent factors for the photocatalytic activity of sol – gel derived TiO2 films Type de document : texte imprimé Auteurs : Suhas R. Patil, Auteur ; B.H. Hameed, Auteur ; Andrijna Sever Skapin, Auteur Année de publication : 2012 Article en page(s) : pp.190–198 Note générale : Génie chimique Langues : Anglais (eng) Mots-clés : Sol–gel  Mesoporous  TiO2  coatings  UV  light  Plasmocorinth  B  Photocatalytic  degradation Résumé : Surfactant-assisted anatase mesoporous TiO2 transparent films, along with P25 translucent films were successfully synthesized and deposited by dip-coating technique. Prepared films were characterized by UV–Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and N2 adsorption–desorption measurements. The hydrophilicity of films was assessed by water contact angle technique. The results revealed that the surfactant-assisted sol–gel films were homogeneous, crack-free, contained anatase phase only with small grain size, and showed an increase in BET surface area and wide range of pore size distribution compared to non-surfactant treated sample. The optical properties and photocatalytic activity of the films for an azo dye, Plasmocorinth B (PB) degradation were analyzed with UV–Vis spectrometer. The photocatalytic activity of the synthesized anatase TiO2 films having high optical quality is comparable to the activity of reference commercial powder P25 films. Relevant results are presented and discussed as a function of the structure and morphology of coatings, which control enables a direct tailoring of the functional response. The high porosity, uniformity, transparency, reliability, photocatalytic activity, good adhesion with the substrate and the excellent performance under cycling operation displayed by surfactant-assisted anatase TiO2 coatings make it a good candidate to be considered in new emerging engineering applications. ISSN : 1385-8947 En ligne : http://www.sciencedirect.com/science/article/pii/S1385894711010321 [article] Alternate coating and porosity as dependent factors for the photocatalytic activity of sol – gel derived TiO2 films [texte imprimé] / Suhas R. Patil, Auteur ; B.H. Hameed, Auteur ; Andrijna Sever Skapin, Auteur . - 2012 . - pp.190–198. Génie chimique Langues : Anglais (eng) in Chemical engineering journal > Vol. 174 N° 1 (Octobre 2011) . - pp.190–198 Mots-clés : Sol–gel  Mesoporous  TiO2  coatings  UV  light  Plasmocorinth  B  Photocatalytic  degradation Résumé : Surfactant-assisted anatase mesoporous TiO2 transparent films, along with P25 translucent films were successfully synthesized and deposited by dip-coating technique. Prepared films were characterized by UV–Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and N2 adsorption–desorption measurements. The hydrophilicity of films was assessed by water contact angle technique. The results revealed that the surfactant-assisted sol–gel films were homogeneous, crack-free, contained anatase phase only with small grain size, and showed an increase in BET surface area and wide range of pore size distribution compared to non-surfactant treated sample. The optical properties and photocatalytic activity of the films for an azo dye, Plasmocorinth B (PB) degradation were analyzed with UV–Vis spectrometer. The photocatalytic activity of the synthesized anatase TiO2 films having high optical quality is comparable to the activity of reference commercial powder P25 films. Relevant results are presented and discussed as a function of the structure and morphology of coatings, which control enables a direct tailoring of the functional response. The high porosity, uniformity, transparency, reliability, photocatalytic activity, good adhesion with the substrate and the excellent performance under cycling operation displayed by surfactant-assisted anatase TiO2 coatings make it a good candidate to be considered in new emerging engineering applications. ISSN : 1385-8947 En ligne : http://www.sciencedirect.com/science/article/pii/S1385894711010321