Indexation 669 : Métallurgie
669.017 Métallurgie physiqueOuvrages de la bibliothèque en indexation 669 (106)
Affiner la recherche
Article : texte imprimé
Cedric J. Gommes, Auteur ; Heiner Friedrich, Auteur ; Petra E. de Jongh, Auteur |Electron tomography is a unique technique for imaging the microstructure of materials with a nanometer resolution. The signal-to-noise ratio of electron tomograms is, however, often too low for a reliable segmentation-based image analysis. We [...]
Article : texte imprimé
Christopher D. Taylor, Auteur ; Turab Lookman, Auteur ; R. Scott Lillard |Total energy calculations based on density functional theory (DFT) have been performed for various uranium–hydrogen configurations relevant to the uranium hydriding reaction. Herein, we investigate the transformation of the supersaturated α-U l[...]
Périodique : texte imprimé
Article : texte imprimé
A. Mottura, Auteur ; N. Warnken, Auteur ; M. K. Miller, Auteur |Atom probe tomography (APT) is used to characterise the distributions of rhenium in a binary Ni–Re alloy and the nickel-based single-crystal CMSX-4 superalloy. A purpose-built algorithm is developed to quantify the size distribution of solute c[...]
Périodique : texte imprimé
N. Dusoulier, Directeur de publication ; Y. Porcheron, Directeur de publication ; Centre national de la recherche scientifique (France), Éditeur scientifique | Paris : CNRS | 1969-1983
Périodique : texte imprimé
R. Duval, Directeur de publication ; Centre national de la recherche scientifique (France), Éditeur scientifique | Paris : CNRS | 1961-1968
Article : texte imprimé
Y.M. Zhu, Auteur ; A.J. Morton, Auteur ; M. Weyland, Auteur |The planar features in a Mg–8Y–2Zn–0.6Zr (wt.%) alloy solution-treated at 500°C for 1 h have been examined using conventional transmission electron microscopy and atomic-resolution high-angle annular dark-field scanning transmission electron mic[...]
Périodique : texte imprimé
Article : texte imprimé
Article : texte imprimé
Leonardo Cipolla, Auteur ; Hilmar K. Danielsen, Auteur ; Dario Venditti, Auteur |A 12% Cr model steel was designed with the purpose of studying the nucleation and growth of modified Z-phase, Cr(V,Nb)N. The model alloy develops Z-phase after relatively short ageing times and contains only nitrides of Cr, V and Nb. Interfere[...]
Périodique : texte imprimé
Lecomte, J., Éditeur scientifique | Bruxelles [Belgique] : Centre de Recherches Métallurgiques | 1971-
Article : texte imprimé
Rosa Robert, Auteur ; Dmitry Logvinovich, Auteur ; Myriam H. Aguirre, Auteur |The influence of the partial substitution of Co by Ti in the LaCoO3 perovskite system is studied by evaluating the electrical conductivity, the Seebeck coefficient and the thermal conductivity of the compounds up to T = 1273 K. The X-ray diffra[...]
Article : texte imprimé
J. A. Sekhar, Auteur ; H. P. Li, Auteur ; G. K. Dey, Auteur |A relationship is inferred between dissipative reactions, nanocrystal formation and nanobands in micropyretically synthesized equimolar Ni–Al alloys. Various microkinetic mechanisms may be operative, depending on the chosen processing condition[...]
Article : texte imprimé
Nobuo Nakada, Auteur ; Hidetoshi Ito, Auteur ; Yoshikazu Matsuoka, Auteur |We investigate deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn specimens of type 316 stainless steel. Deformation-induced martensite preferentially nucleates at the twin boundary between the austenite matri[...]
Article : texte imprimé
A. Vannozzi, Auteur ; Gy Thalmaier, Auteur ; A. A. Armenio, Auteur |Ni–Cu–Co alloys were studied for the development of textured substrates for YBCO-coated conductor application. Three compositions were obtained by adding a fixed amount of 3 at.% Co to the binary NixCu100−x, where x = 40, 50 and 60. Cube textu[...]
