Documents disponibles écrits par cet auteur

Thin-film PVDF sensor-based monitoring of cutting forces in peripheral end milling / Lei Ma in Transactions of the ASME . Journal of dynamic systems, measurement, and control, Vol. 134 N° 5 (Septembre 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 134 N° 5 (Septembre 2012) . - 09 p. Titre : Thin-film PVDF sensor-based monitoring of cutting forces in peripheral end milling Type de document : texte imprimé Auteurs : Lei Ma, Auteur ; Shreyes N. Melkote, Auteur ; John B. Morehouse, Auteur Année de publication : 2012 Article en page(s) : 09 p. Note générale : Dynamic systems Langues : Anglais (eng) Mots-clés : Thin  film  polyvinylidene  fluoride  In  situ  data  logging  platform  Peripheral  end  milling  process  Dynamic  strains Index. décimale : 629.8 Résumé : A sensor module that integrates a thin film polyvinylidene fluoride (PVDF) piezoelectric strain sensor and an in situ data logging platform has been designed and implemented for monitoring of the feed and transverse forces in the peripheral end milling process. The module, which is mounted on the tool shank, measures the dynamic strain(s) produced in the tool and logs the data into an on-board card for later retrieval. The close proximity between the signal source and the PVDF sensor(s) minimizes the attenuation and distortion of the signal along the transmission path and provides high-fidelity signals. It also facilitates the employment of a first principles model based on the Euler–Bernoulli beam theory and constitutive equations of the piezoelectric sensor material to relate the in situ measured PVDF sensor signals to the feed and transverse forces acting on the tool. The PVDF sensor signals are found to compare well with the force signals measured by a platform-type piezoelectric force dynamometer in peripheral end milling experiments. DEWEY : 629.8 ISSN : 0022-0434 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA000134000005 [...] [article] Thin-film PVDF sensor-based monitoring of cutting forces in peripheral end milling [texte imprimé] / Lei Ma, Auteur ; Shreyes N. Melkote, Auteur ; John B. Morehouse, Auteur . - 2012 . - 09 p. Dynamic systems Langues : Anglais (eng) in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 134 N° 5 (Septembre 2012) . - 09 p. Mots-clés : Thin  film  polyvinylidene  fluoride  In  situ  data  logging  platform  Peripheral  end  milling  process  Dynamic  strains Index. décimale : 629.8 Résumé : A sensor module that integrates a thin film polyvinylidene fluoride (PVDF) piezoelectric strain sensor and an in situ data logging platform has been designed and implemented for monitoring of the feed and transverse forces in the peripheral end milling process. The module, which is mounted on the tool shank, measures the dynamic strain(s) produced in the tool and logs the data into an on-board card for later retrieval. The close proximity between the signal source and the PVDF sensor(s) minimizes the attenuation and distortion of the signal along the transmission path and provides high-fidelity signals. It also facilitates the employment of a first principles model based on the Euler–Bernoulli beam theory and constitutive equations of the piezoelectric sensor material to relate the in situ measured PVDF sensor signals to the feed and transverse forces acting on the tool. The PVDF sensor signals are found to compare well with the force signals measured by a platform-type piezoelectric force dynamometer in peripheral end milling experiments. DEWEY : 629.8 ISSN : 0022-0434 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA000134000005 [...]