Simple beam model to estimate leakage in longitudinally cracked pressurized pipes / Stefano De Miranda in Journal of structural engineering, Vol. 138 N° 8 (Août 2012)  

Public ISBD [article]  inJournal of structural engineering > Vol. 138 N° 8 (Août 2012) . - pp.1065–1074. Titre : Simple beam model to estimate leakage in longitudinally cracked pressurized pipes Type de document : texte imprimé Auteurs : Stefano De Miranda, Auteur ; Luisa Molari, Auteur Année de publication : 2012 Article en page(s) : pp.1065–1074. Note générale : Génie civil Langues : Anglais (eng) Mots-clés : Beams Leakage Cracking Pressure pipes Résumé : Losses from water distribution systems are reaching alarming levels in many cities throughout the world. Leakage is often the principal cause of water loss because of aging and deterioration of these systems, and pressure has been verified to assume a key-role in water-loss management. This paper presents a simple analytical model based on a beam with elastic constraints to estimate the leak area (from which the leakage is then estimated) in longitudinally cracked pressurized pipes and to evaluate the effect of pressure on the opening area of the crack. The model is calibrated on the results of a three-dimensional finite-element analysis and then validated by experimental results. The validation has been carried out for a wide range of pipes made of different materials (PVC, cast iron, asbestos-cement, and steel) with radii ranging from 27.5 to 110 mm, thicknesses from 1.5 to 12 mm, and crack lengths from 50 to 200 mm. The beam model, notwithstanding its simplicity, provides reliable leakage evaluations in longitudinally cracked pressurized pipes. ISSN : 0733-9445 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000538 [article] Simple beam model to estimate leakage in longitudinally cracked pressurized pipes [texte imprimé] / Stefano De Miranda, Auteur ; Luisa Molari, Auteur . - 2012 . - pp.1065–1074. Génie civil Langues : Anglais (eng) in Journal of structural engineering > Vol. 138 N° 8 (Août 2012) . - pp.1065–1074. Mots-clés : Beams Leakage Cracking Pressure pipes Résumé : Losses from water distribution systems are reaching alarming levels in many cities throughout the world. Leakage is often the principal cause of water loss because of aging and deterioration of these systems, and pressure has been verified to assume a key-role in water-loss management. This paper presents a simple analytical model based on a beam with elastic constraints to estimate the leak area (from which the leakage is then estimated) in longitudinally cracked pressurized pipes and to evaluate the effect of pressure on the opening area of the crack. The model is calibrated on the results of a three-dimensional finite-element analysis and then validated by experimental results. The validation has been carried out for a wide range of pipes made of different materials (PVC, cast iron, asbestos-cement, and steel) with radii ranging from 27.5 to 110 mm, thicknesses from 1.5 to 12 mm, and crack lengths from 50 to 200 mm. The beam model, notwithstanding its simplicity, provides reliable leakage evaluations in longitudinally cracked pressurized pipes. ISSN : 0733-9445 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000538

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire