Documents disponibles écrits par cet auteur

Contact pressure of indented wide elliptical contacts / N. Biboulet in Transactions of the ASME . Journal of tribology, Vol. 130 N° 4 (Octobre 2008) 

Public ISBD [article]  in Transactions of the ASME . Journal of tribology > Vol. 130 N° 4 (Octobre 2008) . - 7 p. Titre : Contact pressure of indented wide elliptical contacts : dry and lubricated cases Type de document : texte imprimé Auteurs : N. Biboulet, Auteur ; A. A. Lubrecht, Auteur ; L. Houpert, Auteur Article en page(s) : 7 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Pressure Résumé : Indents perturb the pressure and stress distribution and increase the failure risk of rolling element bearings. A numerical study of the pressure perturbation is proposed. An existing dry contact model is extended to account for the indent shoulder influence and the pressure collapse in deeper indents. Moreover, results for pure rolling lubricated contacts are presented. Finally, the ellipticity influence is studied for both dry and lubricated contacts. En ligne : http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1468103 [article] Contact pressure of indented wide elliptical contacts : dry and lubricated cases [texte imprimé] / N. Biboulet, Auteur ; A. A. Lubrecht, Auteur ; L. Houpert, Auteur . - 7 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 130 N° 4 (Octobre 2008) . - 7 p. Mots-clés : Pressure Résumé : Indents perturb the pressure and stress distribution and increase the failure risk of rolling element bearings. A numerical study of the pressure perturbation is proposed. An existing dry contact model is extended to account for the indent shoulder influence and the pressure collapse in deeper indents. Moreover, results for pure rolling lubricated contacts are presented. Finally, the ellipticity influence is studied for both dry and lubricated contacts. En ligne : http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1468103

Rolling bearing stress based life—part I: calculation model / L. Houpert in Transactions of the ASME . Journal of tribology, Vol. 134 N° 2 (Avril 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of tribology > Vol. 134 N° 2 (Avril 2012) . - 13 p. Titre : Rolling bearing stress based life—part I: calculation model Type de document : texte imprimé Auteurs : L. Houpert, Auteur ; F. Chevalier, Auteur Année de publication : 2012 Article en page(s) : 13 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : bearing  life;  rolling  fatigue Résumé : Rolling contact bearing life is calculated using stresses calculated at the surface and in the volume. Surface stresses account for profile and misalignment as well as asperity deformations. Sub-surface stresses are calculated beneath the asperities (for defining the life of the surface) and deeper in the volume for calculating the life of the volume. The stress-life criterion adopted is the Dang Van one in which the local stabilized shear stress is compared to the material endurance limit defined as a function of the hydrostatic pressure (itself a function of the contact pressure) but also residual stresses and hoop stresses (due to fit). A stress-life exponent c, of the order of 4 (instead of 34/3 in the standard Lundberg and Palmgren model) is used for respecting a local load-life exponent of 10/3 at typical load levels. Life of any circumferential slices of the inner, outer, and roller is defined for obtaining the final bearing life. Trends showing how the bearing life varies as a function of the applied bearing load and Lambda ratio (film thickness/RMS roughness height) are given. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000002 [...] [article] Rolling bearing stress based life—part I: calculation model [texte imprimé] / L. Houpert, Auteur ; F. Chevalier, Auteur . - 2012 . - 13 p. tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 134 N° 2 (Avril 2012) . - 13 p. Mots-clés : bearing  life;  rolling  fatigue Résumé : Rolling contact bearing life is calculated using stresses calculated at the surface and in the volume. Surface stresses account for profile and misalignment as well as asperity deformations. Sub-surface stresses are calculated beneath the asperities (for defining the life of the surface) and deeper in the volume for calculating the life of the volume. The stress-life criterion adopted is the Dang Van one in which the local stabilized shear stress is compared to the material endurance limit defined as a function of the hydrostatic pressure (itself a function of the contact pressure) but also residual stresses and hoop stresses (due to fit). A stress-life exponent c, of the order of 4 (instead of 34/3 in the standard Lundberg and Palmgren model) is used for respecting a local load-life exponent of 10/3 at typical load levels. Life of any circumferential slices of the inner, outer, and roller is defined for obtaining the final bearing life. Trends showing how the bearing life varies as a function of the applied bearing load and Lambda ratio (film thickness/RMS roughness height) are given. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000002 [...]

Rolling bearing stress based life—part II: experimental calibration and validation / J. Gnagy in Transactions of the ASME . Journal of tribology, Vol. 134 N° 2 (Avril 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of tribology > Vol. 134 N° 2 (Avril 2012) . - 08 p. Titre : Rolling bearing stress based life—part II: experimental calibration and validation Type de document : texte imprimé Auteurs : J. Gnagy, Auteur ; L. Houpert, Auteur ; F. Chevalier, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : stress  based  bearing  life;  experimental  validation;  confidence  intervals Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The stress based life model described in Paper I was calibrated using a large database of experimental results from a global quality audit test program as well as special development tests conducted for this validation effort. All tests used in the calibration of the new model were case carburized or through hardened tapered roller bearings. The initial model comparison to test results showed very good correlation with a median ratio of test life to calculated life very close to one. Higher accuracy of the stress based model compared to the traditional factor based method was also demonstrated by narrower confidence bands (less data scatter). Validation testing of case carburized tapered roller bearings as well as through hardened spherical roller bearings was also conducted under expanded test conditions beyond those utilized in the quality audit test program (i.e., high and low load, high and low lambda, imposed misalignment, and heavy inner ring interference fits). Although the median ratio of relative life for the validation testing showed the stress based method to be conservative and well above one, the stress based method still showed better accuracy than the traditional factor based method as well as narrower confidence bands for this additional body of experimental data. The conservative results can be explained by use of high quality steel and manufacturing processes in a prototype facility and not series production equipment as was the case with the quality audit database. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000002 [...] [article] Rolling bearing stress based life—part II: experimental calibration and validation [texte imprimé] / J. Gnagy, Auteur ; L. Houpert, Auteur ; F. Chevalier, Auteur . - 2012 . - 08 p. tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 134 N° 2 (Avril 2012) . - 08 p. Mots-clés : stress  based  bearing  life;  experimental  validation;  confidence  intervals Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The stress based life model described in Paper I was calibrated using a large database of experimental results from a global quality audit test program as well as special development tests conducted for this validation effort. All tests used in the calibration of the new model were case carburized or through hardened tapered roller bearings. The initial model comparison to test results showed very good correlation with a median ratio of test life to calculated life very close to one. Higher accuracy of the stress based model compared to the traditional factor based method was also demonstrated by narrower confidence bands (less data scatter). Validation testing of case carburized tapered roller bearings as well as through hardened spherical roller bearings was also conducted under expanded test conditions beyond those utilized in the quality audit test program (i.e., high and low load, high and low lambda, imposed misalignment, and heavy inner ring interference fits). Although the median ratio of relative life for the validation testing showed the stress based method to be conservative and well above one, the stress based method still showed better accuracy than the traditional factor based method as well as narrower confidence bands for this additional body of experimental data. The conservative results can be explained by use of high quality steel and manufacturing processes in a prototype facility and not series production equipment as was the case with the quality audit database. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000002 [...]