Documents disponibles écrits par cet auteur

Innovative method using magnetic particle tracking to measure solids circulation in a spouted fluidized bed / Emily E. Patterson in Industrial & engineering chemistry research, Vol. 49 N° 11 (Juin 2010) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 49 N° 11 (Juin 2010) Titre : Innovative method using magnetic particle tracking to measure solids circulation in a spouted fluidized bed Type de document : texte imprimé Auteurs : Emily E. Patterson, Auteur ; Jack Halow, Auteur Année de publication : 2010 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Magnetic  Particle  Fluidized  Bed Résumé : We describe an innovative method for measuring particle motion inside spouted fluidized beds. The method uses a magnetic tracer particle, which follows the bulk particle flow and is continuously tracked by multiple magnetic field detectors located outside the bed. We analyze signals from the detectors to determine the tracer position at each instant in time. From statistical analysis of the tracer trajectory, characteristic measures of the bulk particle flow, such as the average recirculation frequency, can be determined as a function of operating conditions. For experiments with a range of particle sizes and densities in a 3.9-cm-diameter spouted bed, we find that average solids recirculation rates correlate with excess velocity (superficial minus minimum spouting velocity), particle density, and bed depth. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9008698 [article] Innovative method using magnetic particle tracking to measure solids circulation in a spouted fluidized bed [texte imprimé] / Emily E. Patterson, Auteur ; Jack Halow, Auteur . - 2010. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 11 (Juin 2010) Mots-clés : Magnetic  Particle  Fluidized  Bed Résumé : We describe an innovative method for measuring particle motion inside spouted fluidized beds. The method uses a magnetic tracer particle, which follows the bulk particle flow and is continuously tracked by multiple magnetic field detectors located outside the bed. We analyze signals from the detectors to determine the tracer position at each instant in time. From statistical analysis of the tracer trajectory, characteristic measures of the bulk particle flow, such as the average recirculation frequency, can be determined as a function of operating conditions. For experiments with a range of particle sizes and densities in a 3.9-cm-diameter spouted bed, we find that average solids recirculation rates correlate with excess velocity (superficial minus minimum spouting velocity), particle density, and bed depth. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9008698

Observed mixing behavior of single particles in a bubbling fluidized bed of higher-density particles / Jack Halow in Industrial & engineering chemistry research, Vol. 51 N° 44 (Novembre 2012) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 51 N° 44 (Novembre 2012) . - pp. 14566–14576 Titre : Observed mixing behavior of single particles in a bubbling fluidized bed of higher-density particles Type de document : texte imprimé Auteurs : Jack Halow, Auteur ; Kerri Holsopple, Auteur ; Benjamin Crawshaw, Auteur Année de publication : 2013 Article en page(s) : pp. 14566–14576 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Density  Fluidized  bed  Fluidization  Bubbling  Mixing Résumé : We report experimental observations of the dynamic behavior of single, magnetically tagged 3–4 mm particles varying in density from 0.55 g/cm3 to 1.2 g/cm3 as they migrate freely in a bubbling air-fluidized bed of 177–250 μm glass beads of 2.5 g/cm3 density over a range of air flows. The densities of the tracer particles (made by imbedding small magnets in wooden particles) were chosen to span a range typical for many biomass materials and exhibited both segregated and well-mixed behavior. Using high-speed measurements from externally mounted magnetic probes, we were able to reconstruct three-dimensional spatial and temporal information about the tracers’ trajectories over periods of five minutes. Based on this information, we describe general trends in how the tracers moved and redistributed themselves as functions of their density, fluidization air flow, and the overall concentration of low density particles present. One key finding was that the time average vertical probability distribution of the tracer particles locations is consistent with a Weibull distribution. The effective Weibull parameters appear to vary systematically with the degree of fluidization and particle density. Also, we observed that temporal autocorrelations in the vertical position of the tracer particles vary systematically with fluidization intensity and reveal important information about the dominant bed circulation time scales. Our results suggest that it may be possible to develop relatively simple statistical models or correlations for describing the spatial distribution and circulation of mm sized particles in bubbling beds of this type. Such tools should be useful for simulating some types of fluidized biomass processing and for validating kinetic-theory models of fluidized bed systems. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26620371 [article] Observed mixing behavior of single particles in a bubbling fluidized bed of higher-density particles [texte imprimé] / Jack Halow, Auteur ; Kerri Holsopple, Auteur ; Benjamin Crawshaw, Auteur . - 2013 . - pp. 14566–14576. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 44 (Novembre 2012) . - pp. 14566–14576 Mots-clés : Density  Fluidized  bed  Fluidization  Bubbling  Mixing Résumé : We report experimental observations of the dynamic behavior of single, magnetically tagged 3–4 mm particles varying in density from 0.55 g/cm3 to 1.2 g/cm3 as they migrate freely in a bubbling air-fluidized bed of 177–250 μm glass beads of 2.5 g/cm3 density over a range of air flows. The densities of the tracer particles (made by imbedding small magnets in wooden particles) were chosen to span a range typical for many biomass materials and exhibited both segregated and well-mixed behavior. Using high-speed measurements from externally mounted magnetic probes, we were able to reconstruct three-dimensional spatial and temporal information about the tracers’ trajectories over periods of five minutes. Based on this information, we describe general trends in how the tracers moved and redistributed themselves as functions of their density, fluidization air flow, and the overall concentration of low density particles present. One key finding was that the time average vertical probability distribution of the tracer particles locations is consistent with a Weibull distribution. The effective Weibull parameters appear to vary systematically with the degree of fluidization and particle density. Also, we observed that temporal autocorrelations in the vertical position of the tracer particles vary systematically with fluidization intensity and reveal important information about the dominant bed circulation time scales. Our results suggest that it may be possible to develop relatively simple statistical models or correlations for describing the spatial distribution and circulation of mm sized particles in bubbling beds of this type. Such tools should be useful for simulating some types of fluidized biomass processing and for validating kinetic-theory models of fluidized bed systems. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26620371