Studies on Cr(VI) removal from aqueous solutions by nanoalumina / Madona Lien Paul in Industrial & engineering chemistry research, Vol. 51 N° 46 (Novembre 2012)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 51 N° 46 (Novembre 2012) . - pp. 15242-15250 Titre : Studies on Cr(VI) removal from aqueous solutions by nanoalumina Type de document : texte imprimé Auteurs : Madona Lien Paul, Auteur ; Jastin Samuel, Auteur ; Sushree Bedatrayee Das, Auteur Année de publication : 2013 Article en page(s) : pp. 15242-15250 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Aqueous solution Résumé : The current study deals with Cr(VI) removal using unmodified alumina nanoparticles of two different sizes (NA1: mean hydrodynamic diameter = 75.3 ± 2.8 nm; NA2: mean hydrodynamic diameter = 229.8 ± 3.3 nm). The equilibrium adsorption capacities, 73.2 and 59.4 mg of Cr(VI)/g of adsorbent, were noted for NA1 and NA2, respectively, under optimized conditions (pH 7.0, temperature = 27 °C, initial Cr(VI) concentration = 20 mg L―1, adsorbent dosage = O.lg L―1) but different contact times (120 min for NA1, 180 min for NA2). For both sorbents, the equilibrium adsorption data fitted well with the Langmuir isotherm model. The adsorbent NA1 followed a pseudo-second-order kinetics, whereas NA2 followed pseudo-first-order kinetics. Surface characterization studies (zeta potential measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FTIR) spectroscopy) substantiated oxyanionic binding on the sorbent surface. The EPR and XRD spectroscopy confirmed the existence of reduced Cr(III) on the adsorbent surface. The applicability of the sorbent in Cr(VI)-contaminated water was studied. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26679644 [article] Studies on Cr(VI) removal from aqueous solutions by nanoalumina [texte imprimé] / Madona Lien Paul, Auteur ; Jastin Samuel, Auteur ; Sushree Bedatrayee Das, Auteur . - 2013 . - pp. 15242-15250. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 46 (Novembre 2012) . - pp. 15242-15250 Mots-clés : Aqueous solution Résumé : The current study deals with Cr(VI) removal using unmodified alumina nanoparticles of two different sizes (NA1: mean hydrodynamic diameter = 75.3 ± 2.8 nm; NA2: mean hydrodynamic diameter = 229.8 ± 3.3 nm). The equilibrium adsorption capacities, 73.2 and 59.4 mg of Cr(VI)/g of adsorbent, were noted for NA1 and NA2, respectively, under optimized conditions (pH 7.0, temperature = 27 °C, initial Cr(VI) concentration = 20 mg L―1, adsorbent dosage = O.lg L―1) but different contact times (120 min for NA1, 180 min for NA2). For both sorbents, the equilibrium adsorption data fitted well with the Langmuir isotherm model. The adsorbent NA1 followed a pseudo-second-order kinetics, whereas NA2 followed pseudo-first-order kinetics. Surface characterization studies (zeta potential measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FTIR) spectroscopy) substantiated oxyanionic binding on the sorbent surface. The EPR and XRD spectroscopy confirmed the existence of reduced Cr(III) on the adsorbent surface. The applicability of the sorbent in Cr(VI)-contaminated water was studied. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26679644

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire