Documents disponibles écrits par cet auteur

CuCl2 nanoparticles dispersed in activated carbon fibers for the oxygen production step of the Cu–Cl thermochemical water splitting cycle / Bhaskar Bhaduri in Industrial & engineering chemistry research, Vol. 51 N° 48 (Décembre 2012) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 51 N° 48 (Décembre 2012) . - pp. 15633-15641 Titre : CuCl2 nanoparticles dispersed in activated carbon fibers for the oxygen production step of the Cu–Cl thermochemical water splitting cycle Type de document : texte imprimé Auteurs : Bhaskar Bhaduri, Auteur ; Yogendra Nath Prajapati, Auteur ; Ashutosh Sharma, Auteur Année de publication : 2013 Article en page(s) : pp. 15633-15641 Note générale : Industrail chemistry Langues : Anglais (eng) Mots-clés : Production  Carbon  fiber  Activated  carbon  Nanoparticle Résumé : The thermochemical copper-chlorine (Cu―Cl) cycle is a promising method for the production of hydrogen and oxygen. It consists of four steps: chlorination, disproportionation, oxychlorination, and decomposition. In this study, we focused on the last two steps. A novel dispersion of CuCl2 nanoparticles (∼90 nm) in activated carbon microfibers (ACFs) was prepared and used for the production of oxygen through the oxychlorination of CuCl2 with steam, which was followed by the decomposition of the oxychlorinated product. The CuCl2-ACFs were prepared using the wet incipience impregnation method. After calcination of the impregnated ACF, CuCl2 nanoparticles were produced in situ on the ACF. The production rate of O2 was found to be 2.7 × 10―6 mol/g·s, which is significantly higher than the data reported in the literature. The CuCl2-ACFs prepared in this study are a potential candidate for the O2 production step of the thermochemical Cu―Cl cycle. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26710602 [article] CuCl2 nanoparticles dispersed in activated carbon fibers for the oxygen production step of the Cu–Cl thermochemical water splitting cycle [texte imprimé] / Bhaskar Bhaduri, Auteur ; Yogendra Nath Prajapati, Auteur ; Ashutosh Sharma, Auteur . - 2013 . - pp. 15633-15641. Industrail chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 48 (Décembre 2012) . - pp. 15633-15641 Mots-clés : Production  Carbon  fiber  Activated  carbon  Nanoparticle Résumé : The thermochemical copper-chlorine (Cu―Cl) cycle is a promising method for the production of hydrogen and oxygen. It consists of four steps: chlorination, disproportionation, oxychlorination, and decomposition. In this study, we focused on the last two steps. A novel dispersion of CuCl2 nanoparticles (∼90 nm) in activated carbon microfibers (ACFs) was prepared and used for the production of oxygen through the oxychlorination of CuCl2 with steam, which was followed by the decomposition of the oxychlorinated product. The CuCl2-ACFs were prepared using the wet incipience impregnation method. After calcination of the impregnated ACF, CuCl2 nanoparticles were produced in situ on the ACF. The production rate of O2 was found to be 2.7 × 10―6 mol/g·s, which is significantly higher than the data reported in the literature. The CuCl2-ACFs prepared in this study are a potential candidate for the O2 production step of the thermochemical Cu―Cl cycle. ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=26710602