Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur P. Dupont
Documents disponibles écrits par cet auteur
Affiner la rechercheEddy heat transfer by secondary görtler instability / L. Momayez in Transactions of the ASME . Journal of fluids engineering, Vol. 132 N° 4 (Avril 2010)
[article]
in Transactions of the ASME . Journal of fluids engineering > Vol. 132 N° 4 (Avril 2010) . - 10 p.
Titre : Eddy heat transfer by secondary görtler instability Type de document : texte imprimé Auteurs : L. Momayez, Auteur ; G. Delacourt, Auteur ; P. Dupont, Auteur Année de publication : 2010 Article en page(s) : 10 p. Note générale : fluids engineering Langues : Anglais (eng) Mots-clés : flow (dynamics); heat transfer; turbulence; eddies (fluid dynamics); boundary layers; vortices Résumé : Experimental measurements of flow and heat transfer in a concave surface boundary layer in the presence of streamwise counter-rotating Görtler vortices show conclusively that local surface heat-transfer rates can exceed that of the turbulent flat-plate boundary layer even in the absence of turbulence. We have observed unexpected heat-transfer behavior in a laminar boundary layer on a concave wall even at low nominal velocity, a configuration not studied in the literature: The heat-transfer enhancement is extremely high, well above that corresponding to a turbulent boundary layer on a flat plate. To quantify the effect of freestream velocity on heat-transfer intensification, two criteria are defined for the growth of the Görtler instability: Pz for primary instability and Prms for the secondary instability. The evolution of these criteria along the concave surface boundary layer clearly shows that the secondary instability grows faster than the primary instability. Measurements show that beyond a certain distance the heat-transfer enhancement is basically correlated with Prms, so that the high heat-transfer intensification at low freestream velocities is due to the high growth rate of the secondary instability. The relative heat-transfer enhancement seems to be independent of the nominal velocity (global Reynolds number) and allows predicting the influence of the Görtler instabilities in a large variety of situations. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...] [article] Eddy heat transfer by secondary görtler instability [texte imprimé] / L. Momayez, Auteur ; G. Delacourt, Auteur ; P. Dupont, Auteur . - 2010 . - 10 p.
fluids engineering
Langues : Anglais (eng)
in Transactions of the ASME . Journal of fluids engineering > Vol. 132 N° 4 (Avril 2010) . - 10 p.
Mots-clés : flow (dynamics); heat transfer; turbulence; eddies (fluid dynamics); boundary layers; vortices Résumé : Experimental measurements of flow and heat transfer in a concave surface boundary layer in the presence of streamwise counter-rotating Görtler vortices show conclusively that local surface heat-transfer rates can exceed that of the turbulent flat-plate boundary layer even in the absence of turbulence. We have observed unexpected heat-transfer behavior in a laminar boundary layer on a concave wall even at low nominal velocity, a configuration not studied in the literature: The heat-transfer enhancement is extremely high, well above that corresponding to a turbulent boundary layer on a flat plate. To quantify the effect of freestream velocity on heat-transfer intensification, two criteria are defined for the growth of the Görtler instability: Pz for primary instability and Prms for the secondary instability. The evolution of these criteria along the concave surface boundary layer clearly shows that the secondary instability grows faster than the primary instability. Measurements show that beyond a certain distance the heat-transfer enhancement is basically correlated with Prms, so that the high heat-transfer intensification at low freestream velocities is due to the high growth rate of the secondary instability. The relative heat-transfer enhancement seems to be independent of the nominal velocity (global Reynolds number) and allows predicting the influence of the Görtler instabilities in a large variety of situations. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...]