Documents disponibles écrits par cet auteur

Residual stress tests of high-strength steel equal angles / Huiyong Ban in Journal of structural engineering, Vol. 138 N° 12 (Décembre 2012) 

Public ISBD [article]  in Journal of structural engineering > Vol. 138 N° 12 (Décembre 2012) . - pp. 1446–1454 Titre : Residual stress tests of high-strength steel equal angles Type de document : texte imprimé Auteurs : Huiyong Ban, Auteur ; Gang Shi, Auteur ; Yongjiu Shi, Auteur Année de publication : 2013 Article en page(s) : pp. 1446–1454 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Residual  stress  Sectioning  method  Distribution  model  High-strength  steel  Q420  Equal  angle Résumé : Residual stress is one of the most important imperfections of steel structure members because of its significant effects on buckling behavior. To quantify the residual stresses in 420-MPa high-strength steel hot-rolled equal angle sections, an experimental study was conducted by using the sectioning method. The residual stress magnitudes and distributions for 15 sections were obtained, and the effects of the width-thickness ratios were clarified. Based on the test results, it was found that the ratio between the residual stress and the steel yield strength for 420-MPa steel equal angles was much smaller than that of normal strength steel angles; however, the distribution was analogous. The residual magnitudes significantly correlated with the width-thickness ratios of the legs. In addition, calculation formulas for the residual stress magnitudes were proposed in which the width-thickness ratios of the angle legs were taken into account, and three distribution models were established to be incorporated in the buckling analysis. The fundamental research and conclusions presented may provide useful experimental data and calculation methods for further studies on the residual stress and buckling behavior of high-strength steel members. ISSN : 0733-9445 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000585 [article] Residual stress tests of high-strength steel equal angles [texte imprimé] / Huiyong Ban, Auteur ; Gang Shi, Auteur ; Yongjiu Shi, Auteur . - 2013 . - pp. 1446–1454. Génie Civil Langues : Anglais (eng) in Journal of structural engineering > Vol. 138 N° 12 (Décembre 2012) . - pp. 1446–1454 Mots-clés : Residual  stress  Sectioning  method  Distribution  model  High-strength  steel  Q420  Equal  angle Résumé : Residual stress is one of the most important imperfections of steel structure members because of its significant effects on buckling behavior. To quantify the residual stresses in 420-MPa high-strength steel hot-rolled equal angle sections, an experimental study was conducted by using the sectioning method. The residual stress magnitudes and distributions for 15 sections were obtained, and the effects of the width-thickness ratios were clarified. Based on the test results, it was found that the ratio between the residual stress and the steel yield strength for 420-MPa steel equal angles was much smaller than that of normal strength steel angles; however, the distribution was analogous. The residual magnitudes significantly correlated with the width-thickness ratios of the legs. In addition, calculation formulas for the residual stress magnitudes were proposed in which the width-thickness ratios of the angle legs were taken into account, and three distribution models were established to be incorporated in the buckling analysis. The fundamental research and conclusions presented may provide useful experimental data and calculation methods for further studies on the residual stress and buckling behavior of high-strength steel members. ISSN : 0733-9445 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000585