Documents disponibles écrits par cet auteur

Analysis of elastic, doubly symmetric, horizontally curved beams during lifting / Plaut, Raymond H. in Journal of structural engineering, Vol. 139 N° 1 (Janvier 2013) 

Public ISBD [article]  in Journal of structural engineering > Vol. 139 N° 1 (Janvier 2013) . - pp. 39–46 Titre : Analysis of elastic, doubly symmetric, horizontally curved beams during lifting Type de document : texte imprimé Auteurs : Plaut, Raymond H., Auteur ; Cristopher D. Moen, Auteur Année de publication : 2013 Article en page(s) : pp. 39–46 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Curved  beams  Lifting  Suspended  structures  Closed-form  solutions  Lateral  stability  Elastic  analysis  Horizontally  curved  beams  Imperfect  beams  Bridge  construction  Torsion Résumé : The lifting of horizontally curved beams (or almost-straight beams with an imperfection in shape) is considered, with application in the construction of bridges. A circularly curved beam that is suspended at two symmetric locations by vertical or inclined cables is analyzed. The cross section of the beam is assumed to be doubly symmetric, the material is assumed to be linearly elastic, the cross-sectional dimensions are assumed to be small relative to the radius of curvature, and the deformations are assumed to be small. Both uniform (St. Venant) torsion and inclusion of nonuniform (warping) torsion are treated. Analytical equations are derived for the overall roll angle of the beam, the internal forces and moments, the weak-axis and strong-axis deflections, and the cross-sectional angle of twist. The behavior depends crucially on the locations of the lift points. ISSN : 0733-9445 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000612 [article] Analysis of elastic, doubly symmetric, horizontally curved beams during lifting [texte imprimé] / Plaut, Raymond H., Auteur ; Cristopher D. Moen, Auteur . - 2013 . - pp. 39–46. Génie Civil Langues : Anglais (eng) in Journal of structural engineering > Vol. 139 N° 1 (Janvier 2013) . - pp. 39–46 Mots-clés : Curved  beams  Lifting  Suspended  structures  Closed-form  solutions  Lateral  stability  Elastic  analysis  Horizontally  curved  beams  Imperfect  beams  Bridge  construction  Torsion Résumé : The lifting of horizontally curved beams (or almost-straight beams with an imperfection in shape) is considered, with application in the construction of bridges. A circularly curved beam that is suspended at two symmetric locations by vertical or inclined cables is analyzed. The cross section of the beam is assumed to be doubly symmetric, the material is assumed to be linearly elastic, the cross-sectional dimensions are assumed to be small relative to the radius of curvature, and the deformations are assumed to be small. Both uniform (St. Venant) torsion and inclusion of nonuniform (warping) torsion are treated. Analytical equations are derived for the overall roll angle of the beam, the internal forces and moments, the weak-axis and strong-axis deflections, and the cross-sectional angle of twist. The behavior depends crucially on the locations of the lift points. ISSN : 0733-9445 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000612