Documents disponibles écrits par cet auteur

Thermodynamic effect on a cavitating inducer—Part I: geometrical similarity of leading edge cavities and cavitation instabilities / Jean-Pierre Franc in Transactions of the ASME . Journal of fluids engineering, Vol. 132 N° 2 (Fevrier 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of fluids engineering > Vol. 132 N° 2 (Fevrier 2010) . - 08 p. Titre : Thermodynamic effect on a cavitating inducer—Part I: geometrical similarity of leading edge cavities and cavitation instabilities Type de document : texte imprimé Auteurs : Jean-Pierre Franc, Auteur ; Guillaume Boitel, Auteur ; Michel Riondet, Auteur Année de publication : 2010 Article en page(s) : 08 p. Note générale : fluids engineering Langues : Anglais (eng) Résumé : The thermodynamic effect on a cavitating inducer is investigated from joint experiments in cold water and Refrigerant 114. The analysis is focused on leading edge cavitation and cavitation instabilities, especially on alternate blade cavitation and supersynchronous rotating cavitation. The cavity length along cylindrical cuts at different radii between the hub and casing is analyzed with respect to the local cavitation number and angle of attack. The similarity in shape of the cavity closure line between water and R114 is examined and deviation caused by thermodynamic effect is clarified. The influence of rotation speed on cavity length is investigated in both fluids and analyzed on the basis of a comparison of characteristic times, namely, the transit time and a thermal time. Thermodynamic delay in the development of leading edge cavities is determined and temperature depressions within the cavities are estimated. Thresholds for the onset of cavitation instabilities are determined for both fluids. The occurrence of cavitation instabilities is discussed with respect to the extent of leading edge cavitation. The thermodynamic delay affecting the occurrence of cavitation instabilities is estimated and compared with the delay on cavity development. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/Issue.aspx?issueID=27408 [...] [article] Thermodynamic effect on a cavitating inducer—Part I: geometrical similarity of leading edge cavities and cavitation instabilities [texte imprimé] / Jean-Pierre Franc, Auteur ; Guillaume Boitel, Auteur ; Michel Riondet, Auteur . - 2010 . - 08 p. fluids engineering Langues : Anglais (eng) in Transactions of the ASME . Journal of fluids engineering > Vol. 132 N° 2 (Fevrier 2010) . - 08 p. Résumé : The thermodynamic effect on a cavitating inducer is investigated from joint experiments in cold water and Refrigerant 114. The analysis is focused on leading edge cavitation and cavitation instabilities, especially on alternate blade cavitation and supersynchronous rotating cavitation. The cavity length along cylindrical cuts at different radii between the hub and casing is analyzed with respect to the local cavitation number and angle of attack. The similarity in shape of the cavity closure line between water and R114 is examined and deviation caused by thermodynamic effect is clarified. The influence of rotation speed on cavity length is investigated in both fluids and analyzed on the basis of a comparison of characteristic times, namely, the transit time and a thermal time. Thermodynamic delay in the development of leading edge cavities is determined and temperature depressions within the cavities are estimated. Thresholds for the onset of cavitation instabilities are determined for both fluids. The occurrence of cavitation instabilities is discussed with respect to the extent of leading edge cavitation. The thermodynamic delay affecting the occurrence of cavitation instabilities is estimated and compared with the delay on cavity development. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/Issue.aspx?issueID=27408 [...]

Thermodynamic effect on a cavitating inducer—Part II: on-board measurements of temperature depression within leading edge cavities / Jean-Pierre Franc in Transactions of the ASME . Journal of fluids engineering, Vol. 132 N° 2 (Fevrier 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of fluids engineering > Vol. 132 N° 2 (Fevrier 2010) . - 09 p. Titre : Thermodynamic effect on a cavitating inducer—Part II: on-board measurements of temperature depression within leading edge cavities Type de document : texte imprimé Auteurs : Jean-Pierre Franc, Auteur ; Guillaume Boitel, Auteur ; Michel Riondet, Auteur Année de publication : 2010 Article en page(s) : 09 p. Note générale : fluids engineering Langues : Anglais (eng) Mots-clés : Temperature,  Cavitation,  Blades,  Cavities Résumé : Temperature depression within the leading edge cavities on a space inducer is measured in Refrigerant 114 using miniature thermocouples mounted on the rotating blades. Time-averaged values of cavity temperature depression are determined all along the descent in cavitation number and correlated with the extent of cavities. In addition to mean values, temperature fluctuations are analyzed with respect to the onset of cavitation instabilities, namely, alternate blade cavitation and supersynchronous rotating cavitation. Temperature spectra relative to a rotating frame of reference are compared with pressure spectra obtained in a fixed frame of reference. Temperature oscillations issued from different blades are compared, and phase shifts between consecutive and opposite blades are evaluated in the case of the supersynchronous instability regime. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/Issue.aspx?issueID=27408 [...] [article] Thermodynamic effect on a cavitating inducer—Part II: on-board measurements of temperature depression within leading edge cavities [texte imprimé] / Jean-Pierre Franc, Auteur ; Guillaume Boitel, Auteur ; Michel Riondet, Auteur . - 2010 . - 09 p. fluids engineering Langues : Anglais (eng) in Transactions of the ASME . Journal of fluids engineering > Vol. 132 N° 2 (Fevrier 2010) . - 09 p. Mots-clés : Temperature,  Cavitation,  Blades,  Cavities Résumé : Temperature depression within the leading edge cavities on a space inducer is measured in Refrigerant 114 using miniature thermocouples mounted on the rotating blades. Time-averaged values of cavity temperature depression are determined all along the descent in cavitation number and correlated with the extent of cavities. In addition to mean values, temperature fluctuations are analyzed with respect to the onset of cavitation instabilities, namely, alternate blade cavitation and supersynchronous rotating cavitation. Temperature spectra relative to a rotating frame of reference are compared with pressure spectra obtained in a fixed frame of reference. Temperature oscillations issued from different blades are compared, and phase shifts between consecutive and opposite blades are evaluated in the case of the supersynchronous instability regime. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/Issue.aspx?issueID=27408 [...]